|
- Build Instructions for the Indo-ware SSB 6. 1 Transceiver . . .
The kit is basically the main mother board for building a single conversion superhet 6-band HF SSB shortwave radio transceiver and comes as a kit of parts The bands covered are: - 3 5MHZ 7MHZ 10MHZ 14MHZ 21MHZ 29MHZ (depending on the VFO settings used) and the modes covered are CW LSB USB
- Lecture 6: Modulators, Receivers, AM, and SSB
Modulators Using Nonlinearities Suppose we have the non-linear input-output characteristic:
- Data sheet Manual - SSB
Description The mast preamplifier DBA 270 is used to improve the reception properties of amateur radio stations in the 2 m and 70 cm bands Due to the already built-in diplexer, only one RF socket is required to connect the (dual-band) antenna and the derivation cable The automatic transmit receive switchover (VOX) switches the amplifier off when transmitting and on again when receiving
- Integrity Bank, SSB, Houston, TX - FDIC
ORDER The undersigned, acting on behalf of the Board of Directors of the Federal Deposit Insurance Corporation pursuant to delegated authority, has fully considered all available facts and information relevant to the factors of Section 6 of the Federal Deposit Insurance Act and relating to the application for Federal deposit insurance through the Deposit Insurance Fund for Integrity Bank, SSB
- Microsoft Word - EN-1032_DBA 270. doc - SSB
The mast preamplifier DBA 270 improves reception of amateur radio stations in the 2m and the 70cm band Because of the built-in diplexer only one HF socket each for the (Combi) antenna and the downleading cable is needed The automatic Trx-receiver switch will disable the preamplifier during transmissions and enable it again for reception The maximum power is 100 Watt! The unit is equipped
- 160913 1037 SP 70 CSP ENG - SSB
How to connect: Always protect the input and output of the preamplifier from static voltages and HF power! High power at the input or output can destroy the internal device Before connecting the antenna cable, any existing static charge in the cable should be the discharged by shorting the inner and outer conductor of your cables The connection sequence should be as follows: Receiver
- Catalog-Insert-7 - Smalley
微小型应用的智能解决方案 新扩建的生产制造能力,使得斯迈利设计和制造传统的斯迈利波形弹簧与 Spirolox弹性挡圈型号,精巧至0 165“,或4毫米直径。请挑战我们为您的微型应用设计精巧弹性档圈或弹簧。 咨询。
|
|
|