- DC-4 40 Drill Center - Haas Automation Inc.
Well suited to the construction, automotive, and aviation industries, the DC-4 40 can process parts more than 8 ft (2 5 m) long and 1 6 ft (0 5 m) wide, in a variety of shapes and profiles, such as long extrusions, steel channel, angle iron, and pipe
- Boosting Efficiency with the New Haas DC-4 40 Drill Center
What is the Haas DC-4 40 Drill Center? The Haas DC-4 40 is a gantry-style drill tap machine designed for high-speed, high-precision machining With an impressive 98 4″ X-axis travel, it’s ideal for processing long, narrow parts or high-density production setups
- Haas DC-4 40 Drill Center Cutting Demo - Haas Automation, Inc.
The DC-4 40 is a gantry-style drill tap machine with 98 4" (2500 mm) of X-axis travel to accommodate long, narrow parts or high-density production setups
- 3-axis CNC machining center - DC-4 40 - Haas Automation - vertical . . .
Find out all of the information about the Haas Automation product: 3-axis CNC machining center DC-4 40 Contact a supplier or the parent company directly to get a quote or to find out a price or your closest point of sale
- DC-3 DC-4 - Haas Automation Inc.
Well suited to the construction, automotive, and aviation industries, the DC-3 and DC-4 can process parts up to 8 ft (2 5 m) long and 1 6 ft (0 5 m) wide, in a variety of shapes and profiles, such as long extrusions, steel channel, angle iron, and pipe
- DC-4 40 Pre-Install Guide - Haas Automation Inc.
Use only Haas-supplied lifting hardware, if required Refer to the lifting placard on the rear of the machine for model-specific lifting information Attach the lifting bracket, if required, and chains as shown Make sure that the chains do not contact the sheet metal enclosure or electrical cables Note the use of spreader bars and lumber
- SERIES - Haas Automation Inc.
Each DC series machine is equipped with a high-performance grease-packed spindle powered by a reliable Haas inline direct-drive system The spindle cartridge is liquid cooled for thermal stability The Haas inline direct-drive system provides high accel decel rates to minimize cut-to-cut times
- DC-4 40 MLD_02_2025 - Haas Automation Inc.
NOTE: MACHINE MUST BE PLACED ON ONE CONTINUOS CONCRETE SLAB SLAB SHOULD EXTEND 12in [305mm] BEYOND ANCHOR HOLES IN ALL DIRECTIONS
|