|
- Draining the Refilling the Tub - modtub. gorgias. help
Power up the unit so the pump routes the water through the water hose to drain the water where desired Once emptied, shut off power to the unit so the pump and chiller does not run dry
- Maintenance Tips for Your Cold Plunge Tub - Modtub
Not only does it help to keep the tub in pristine condition, but it also ensures a safe and hygienic environment for your cold plunging sessions To start the cleaning process, drain the water from the tub completely
- Modtub Setup - YouTube
Step by step instructions from delivery to setup of your ModPlunge for cold plunging and cold water therapy more
- How To Drain Cold Plunge: Caring For Your Cold Plunge Chiller
In this guide, we'll show you how to properly drain your tub to extend its lifespan and enhance its performance Let’s dive in and ensure your SISU stays in pristine condition, ready to transform any day into a spa-like retreat right at home
- DIY MODTUB : r coldplunge - Reddit
Sourcing all the connectors is such a pain Also, do you get any condensation issues where it creates puddles in certain areas
- How To - modtub. gorgias. help
Drain your tub easily with the provided water hose drainage connector, found in the accessories box of your order The videos below will show two ways of draining your tub, and explain a few alternative methods in addition
- Frequently Asked Questions – Modtub
To ensure optimal flow, you may even opt to remove the filter completely and allow the water pass freely through the filter housing with no chance of the filter slowing down flow
- Modtub Set Up
Take the black elbow valve fitting found in the accessories box and screw it into the drain fitting on the side of the tub 2 Hang the filter assembly on the two screws on the backside of the tub 3 Remove the pump from its box and slide it into the attached bracket on the bottom center of the tub
|
|
|