- portShow - Broadcom
Use this command to display general port status and specific configuration parameters for a specified port, GbE port, or VE_Port If this command is executed for a specified port with no additional options, it displays general status and configuration for that port
- Brocade Switch Commands
This is a cheat list of the most used operational and troubleshooting commands used in Brocade FOS If you want to contribute with more commands, please drop us an email at info@networkcommands net
- Brocade CLI Cheat sheet – dailytechsaga
Ensure all switches in a fabric have the same parameters in order to communicate Displays the status of local and remote CP’s High availability , heartbeat and synchronization To set the long distance mode Default is L0 (Normal), as per distance will display LE <=10 kms , L0 5 <=25kms , L1 <=50 kms, L2<=100kms , LD=auto , LS = Static
- How to Show the Port Status on a Brocade Switch by Nicholas . . . - YouTube
Use the 'portshow' command to check the link status on your Brocade switch This command is helpful is pin-pointing link failures FC loop issues === Re
- SAN # Brocade Switch# FOS CLI Commands | infraadmins
Ensure all switches in a fabric have the same parameters in order to communicate Displays the status of local and remote CP’s High availability , heartbeat and synchronization To set the long distance mode Default is L0 (Normal), as per distance will display LE <=10 kms , L0 5 <=25kms , L1 <=50 kms, L2<=100kms , LD=auto , LS = Static
- VMWARE - VMarena
This is a list of useful Brocade switch commands that will help you for administration or management operation These commands are useful for for Zoning, Show, Port, Time Date, License, Banner, Password, SNMP, User Config, Firmware, and Miscellaneous
- StorageAdmins: Brocade Switch basic Commands - Blogger
The nsAllShow command displays information from all switches Each line of output displays: Type U for unknown, N for N_Port, NL for NL_Port Pid 24-bit Fibre Channel address COS List of classes of service supported by device PortName Device port World Wide Name NodeName Device node World Wide Name TTL Time-to-live (in seconds) for cached
- Portshow – Brocade Fabric OS Command Reference (Supporting Fabric OS v7 . . .
To display the command usage on the switch, use portShow [action]
|