|
- 3800 Series III - Things to check for? - 3800Pro Forums
Hi all, It's been a while since I've had a 3800 powered car I wandered for a few years, after owning four 3800 powered cars in a row I'm thinking of coming back into the fold, but I'm finding mostly Series III powered vehicles for sale in my area Are there any things to check for on a
- Slightly Rough Idle | 3800Pro Forums
Eng: 97 Vin K SE ( norm asp ) This engine idles slightly rough (varies 750-900 rpm) but runs fine with throttle above idle No DTCs or misfires shown
- Bin File Repository - 3800Pro Forums
Can we get a bin file repository here? Dyno Brian can you get bin files added to the type of attachments
- Series III V6, Coolant Plastic Elbow Leak - 3800Pro Forums
Help! 2004 Grand Prix with 3800 Series III V6 There is a plastic 90 degree elbow under the alternator tensioner area It has sprung a coolant leak and I'm not sure how to replace it! It appears to be threaded on one end and a press fit on the other Can you help???
- ZZP alloy heads - 3800Pro Forums
v6 3800 alloy heads hi,im putting these alloy heads on a 4 2 stroker with a 2 4 whipple supercharger will put up h p when I get it tuned, should be good,,,,flowed 248cfm inlet= 462 h p naturaly aspirated and 180 cfm at 600 on the exhaust can not port them any more 038 wall thickness on push rod wall
- New coils, Icm and crank sensor still no spark - 3800Pro Forums
I changed my ignition coils out and put the new ones on and now I have no spark I changed the icm thinking it was that and still no spark so doing some research found out the crank sensor goes bad common problem so I changed that and still no spark car will turn over but wont fire any
- 3800 - Swap 4T65 to 4T80 Pt1 | 3800Pro Forums
3800 - Swap 4T65 to 4T80 '96 SSEi with the Twin-Charged 3800 SII The first thing that jumps out is the enormous side cover and general girth of the 4T80 In stock form its rated a conservative 305lbs ft torque There are a few Caddys pushing WAY more than that thru I'm sure in stock form
- Buck lacrosse 3. 8 cxl-No heat, coolant won’t stay topped. . .
So the Air blows well but I have no heat I went through a number of diagnostics that I can rule out -flushed the heater core -checked radiator cap for milky white white smoke exhaust -water pump doesn’t seem to be making a noise (heard that happens when it starts to fail) So anyways, had the
|
|
|