|
- ADG vs Lapua Preliminary Comparison - Long Range Hunting Forum
ADG got on my radar via a thread on 338 and then because they will apparently be making brass for the Sherman Short This is just a rudimentary comparison I did for fun because I see others doing similar tests but have not noticed any using these brands I have just basic reloading equipment and by no means lab grade measuring devices
- Brass Quality: ADG vs Lapua vs Peterson vs Norma
Lapua, ADG and Peterson are top quality and very durable Norma is very consistent and good quality but the primer pockets don't last as long
- 6. 8 Wester ADG Brass - Long Range Hunting Forum
Several folks have lamented the fact can only get Win brass for the 6 8W Looks like ADG is starting to work on it I posted this on FB group: Hey folks, this dealer is looking to start taking orders for trial runs ADG Cartridge Brass I don't know anything about them other than sponsor on
- ADG Brass | Long Range Hunting Forum – Expert Gear Reviews Tactical Tips
Moving from Norma to ADG brass for my 300 RUM It is recommended by ADG to reduce loads by 10% Does anyone have experience with this? Should I just take my favorite load and back off 10% then step back up to my recipe I am using Retumbo and my load is 15% below max now Also if you have any
- 7-6. 5prcw hunting gun - Long Range Hunting Forum
ADG make brass ready to go, but necking up Lapua is another good option if you don't mind donuts 284 brass is getting harder to find and I already have a naked tikka magnum action sitting in the safe The only thing I'm still on the fence about is dies I don't want to spend $400 on a set of dies Thinking a 6 5prc die with correct bushing for sizing and just use a 7prc seating die Not sure
- 7prc brass comparison - Long Range Hunting Forum
I have about 200 pieces of hornady brass Primer pockets are shot in 3-4 reloads, what are people seeing in other brands? I know there is Peterson and ADG out there already I have ADG and havnt used it yet Wondering if everyone seems to be doing better with it
- How much should I reduce loads? New ADG Brass
Guys, I've heard that due to lower volume, one should reduce the charge by ~10% for new ADG brass What are your findings? I have been running 210 Bergers w Hornady brass, 75 5 grains of VV N565, and GM215M primers, but I want to start with a new lot of ADG brass and try out the 208 ELD-M’s
- ADG vs Peterson vs Lapua Brass - Long Range Hunting Forum
If there is a thread concerning this subject I apologize, I was unable to find one I currently use Lapua LRP brass for my 308W loads, both hunting and LR competition The match loads are close to, or at, a max charge of Varget, 155 grain Berger Hybrid, 2975 FPS, 30" barrel length Hunting
|
|
|