|
- HOWTO: Airspy mini and Airspy R2: Piaware dump1090-fa configuration
Automatic installation scripts: GitHub - wiedehopf airspy-conf: Configure airspy_adsb for use with readsb or piaware Manual installation configuration: Manual airspy configuration to work with dump1090 fa and piawa hellip;
- V5. 0. 5-airspy dump1090-fa with native AirSpy support now available
dump1090-fa-v5 0 5-airspy dump1090-fa-v5 0 4-airspy dump1090-fa-v5 0 3-airspy dump1090-fa-v5 0-airspy Way back in October of last year, I started working in integrating native AirSpy support into dump1090-fa I actually finished it back in January February but @obj has been swamped and just hasn’t had the time to create an official dump1090-fa release with the new sdr and demodulator He did
- Airspy R2 series and Mini firmware update - ADS-B Flight Tracking . . .
The Airspy R2 series were already privileged for their high dynamic range and low phase noise Now these parameters just got better with a simple firmware update Check the firmware download in the product page: Airspy R2 - airspy com Enjoy! The Airspy Team I ran the update on my R2, and working on a remote mini install via command line
- Is an Airspy R2 worth $70 more than a Mini? - FlightAware Discussions
Due to a hardware failure I need to buy another receiver I’ve decided on an Airspy product to use with either a Pi 4 or 5 Is the R2 performance that much different than the Mini considering the $70 price difference?
- How to update your Airspy mini and Airspy R2, associated with the . . .
Once i got my Airspy i plugged it in, started the Raspberry and used the automatic installer of wiedehopf by simply following the instructions given in the automated readsb installer followed by the airspy installer Took me about 5 Minutes without any additional steps to be done (beside the configuration of the values)
- Airspy Mini Help - ADS-B Flight Tracking - FlightAware Discussions
Received an Airspy Mini today I’ve set it up following the instructions here: Manual airspy configuration to work with dump1090 fa and piaware · wiedehopf airspy-conf Wiki · GitHub …but nothing is happening I’m using a Rpi3B Any suggestions of what I could try or do gratefully received Thank you
- PI4 with Airspy Which is better: USB2 or USB3? - FlightAware Discussions
The Airspy receivers are heavy users of the USB interfaces Are there any tests or evaluations on using Pi4’s USB2 or USB3 connections for the best performance with the Airspy receivers? I suspect we would have to assume the Airspy’s were the only devices connected via USB Looking at the spec’s on the receivers, no mention if they are set up for USB2, 3 0 or 3 1 Has anyone have some
- Airspy: MLAT - not synchronized with any nearby receivers
An interesting little problem Firstly the system; an Odroid XU4, running an Airspy, utilising wiedehopf’s set up option, which includes the running the Flightaware install of piaware and dump 1090 procedure Piaware ver 3 7 1 Everything appears to be running ok 3 green boxes in my site information and apparent recording of the limited MLAT flights showing in collection graph and control
|
|
|