|
- Solved: Avaya Switch to Cisco Switch Config - Cisco Community
we are replacing old avaya switches with a Cisco switches and i could not understand the Avaya configuration on which are the etherchannels, access ports, trunk ports, what are the access vlans for the access ports and what is the native vlan? here is the part of the config im confused about ! ! **
- LLDP Avaya 9600 Series Phones - Cisco Community
Start a conversation Cisco Community Technology and Support Small Business Support Community Switches - Small Business LLDP Avaya 9600 Series Phones Bookmark | Subscribe
- DHCP option 242 string handling for Avaya IP phones
Avaya 4600 Series phones use Option 176 as the default DHCP Site Specific Option Number (SSON) with TFTP or HTTP The 1600 and 9600 Series phones use Option 242 with HTTP or TLS Both IP telephones use these servers as file servers, to download firmware and access scripts or settings files Avaya uses a 46xxsettings txt file that contains
- Avaya K175 as 3rd party SIP issues - Cisco Community
Dears I Have Avaya K175 configured as SIP on Cisco Call Manager the phone keeps disconnecting every 2- 3 minutes I can make calls from Avaya phone to Cisco phones but Avaya is not receiving from Cisco " gives busy tone" I checked Cisco Avaya logs (attached) found that Avaya phone sends 2 reg
- Avaya phones with Cisco switches
We are trying to install a group of Avaya phones in our network (Cisco network) but I have a doubt about the configuration, actually we have next configs in each switch: default-gateway is the router of our LAN Data (10 6 140 1) VLAN data is number 2 VLAN voice (defined in each switch now) is num
- Compatibilidad CISCO - AVAYA - Cisco Community
Buenas tardes: Quisiera por favor si es posible conectar telefonos IP de la marca AVAYA con la central telefonica CISCO Esto por que actualmente tengo una central telefonica AVAYA BCM 50 y 450 y telefonos IP de AVAYA, estoy tratando de migrar a CISCO pero uno de mis problemas es que la cantidad d
- Cisco Avaya Integration
Assuming the Avaya is also IP then yes, you can do SIP or H323 between CUCM and the Avaya Or, if the Avaya isn't SIP, then you can terminate a Qsig trunk on a Cisco GW which then communicates with CUCM via whatever IP protocol you want to use Of course, other than the trunk you use, you need to set up the dial-plans on the Cisco side and the Avaya side so that each knows what calls to route
- AVAYA phone does not authenticate with the attribute to LLDP CISCO ISE
Hello, I bring another interesting topic, I have ISE 2 4 and I am trying to authenticate avaya phones using the LLDP attribute, however it does not work I leave the configuration and see if it is possible that the same thing happened to someone interface GigabitEthernet1 0 20 switchport access vl
|
|
|