|
- Baofeng UV32 DM32 - RadioReference. com Forums
Baofeng official website provides you with the most cost-effective long-range Baofeng two-way radios and meets all your amateur and commercial need With OEM, ODM ability, quotation for bulk order is available
- My thoughts on Baofeng radios - RadioReference. com Forums
Radio 2 Baofeng DM32 Kenwood NX-5200 receive signals where the DM32 did not 10 miles setting on dash not moving parked Analog 146 700 Radio 1 Kenwood NX-5200 Radio 2 Baofeng DM32 The Kenwood NX-5200 won again TX and RX from 10 miles setting on the dash not moving parked
- Baofeng UV32 DM32 | Page 2 - RadioReference. com Forums
It works well on my Radioddity GD-77, Retevis RT-3S Baofeng RD-5R I like to have the extended frequency range, so that I don't have to carry around multiple radios Also, the reception in these radios is far better than any scanner that I own
- How to program repeaters into a Baofeng UV-5R.
Guide to programming repeaters into a Baofeng UV-5R I see a good bit of threads about how to program repeaters and so on Lets start 1 Power on your Baofeng 2 Hit the VFO Memory button to enter "frequency mode"(VFO) 3 Hit the menu button, enter the number 7 You will want to hit Menu button again and select OFF 4 Now you type in your RX
- Baofeng AR-5RM - Page 3 - Equipment Reviews - myGMRS. com Forums
I recently picked up a Baofeng AR-5RM The kit included the radio with battery, a standard "701 clone" antenna tuned to FM (broadcast radio) 136-174MHz 400-520MHz, an Abbree AR-771 VHF UHF antenna
- Baofeng AR-5RM - Equipment Reviews - myGMRS. com Forums
I recently picked up a Baofeng AR-5RM The kit included the radio with battery, a standard "701 clone" antenna tuned to FM (broadcast radio) 136-174MHz 400-520MHz, an Abbree AR-771 VHF UHF antenna, a desktop charger, wrist strap, belt clip, and a manual which turned out to be better written t
- Baofeng DM-32 CPS cable issues - RadioReference. com Forums
I picked up the Baofeng DM32 and tried using the CPS I programmed a test channel on DMR when I tried programming in several more, it wouldn't program It's acting like the COM port is incorrect (I received a "communication failed" prompt) Has anyone had this issue, and if so, what was the
- Baofeng - VFO Channel Mode | RadioReference. com Forums
The Baofeng 5RH Pro (GPS) does as well after I installed the newest firmware update, and a couple Quansheng K series radios I modified using F4HWN firmware and egzumer_v0 22 firmware Both of those will add channel name and frequency on both A and B bands as well
|
|
|