|
- Bondo then Prime Or Prime then Bondo? - AutoBody101. com
The #1 site on the Internet to discuss and learn about autobody and paint If you want to learn how to paint your own car, this is the place!
- etch primer, over or just around body filler onto bare metal
The #1 site on the Internet to discuss and learn about autobody and paint If you want to learn how to paint your own car, this is the place!
- Can I apply body filler to sanded paint? Or can I only apply to bare . . .
This is not to say that bondo doesn't shrink, but it shrinks less For surface prep you will have to rough up the paint before you apply bondo I've used 36 grit if the paint is thick, but if not thick, you can use 80 grit The bondo needs this to bite into the paint You shouldn't apply the bondo over paint very thick though
- Epoxy primer. . . . To bondo before or after - HybridZ
Bondo first, or you will break through the primer when you sand it down If you break through you simply recoat those areas with epoxy prior to reapplying body filler If you apply epoxy prior to any filler work, then reapply after you sand your filler (before reapplying any more filler if you have bare steel areas) you'll have 100% coverage
- Is there a way to moisten dry body filler in the can?
The #1 site on the Internet to discuss and learn about autobody and paint If you want to learn how to paint your own car, this is the place!
- bondo expiration how good of bondo is this? • How to Paint Your Own . . .
The #1 site on the Internet to discuss and learn about autobody and paint If you want to learn how to paint your own car, this is the place!
- Bondo over rust converter??? (PIC) - Body Kits Paint - HybridZ
I'd then like to touch up the area with some bondo to smooth things out I'll be welding up the holes where the spot welds were removed from the battery tray Any other suggestions ideas? Any problems with applying bondo over a rust converter? Any suggested rust converters?
- How much bondo is too much? - Body Kits Paint - HybridZ
Hey all I have read posts where people ask is this too much rust Well this is similar but with bondo What is too much bondo? My 77 280 that I started on not to long ago I am prepping the body Apon sanding to the metal at all the holes (getting ready to fill trim holes and the like) I have not
|
|
|