|
- Best Gun for Beginner Hunter | Ohio Sportsman - Your Ohio Hunting and . . .
Ok, I am looking for a resonable gun that I can used for both deer (slug) and rabbit (bird barrel) I am plannign on buying a duel barrel, but wouldn't like to spend more than $350-$400 My dad uses a Remington 870, which I have used for both deer and rabbit (just shooting shot out of his
- Kokosing Public Land - Ohio Sportsman
Has anyone hunted over near the Kokosing Lake public area??? ODRN says that they have close to 1,000 acres?? I am wondering if this might be worth my time to check out mid week Thanks Capt Ernie
- Deer Skull Cap Whitening | Ohio Sportsman - Your Ohio Hunting and . . .
I have recently shot a smaller buck and he is not nice enought to make a euro mount I cut the rack off and cut all of the skin, fur, membrane, etc off the skull cap I want to whiten the skull cap but im not sure how to go about it Does anyone have any suggestions on how what to use to whiten it?
- Tip o’ the cap | Ohio Sportsman - Your Ohio Hunting and Fishing Resource
As the season winds to a close, a seasonal thanks go to the dogs they work with us and for us thru all sorts of “stuff” and care little for other than the barest pat of notice and a dose of kibble
- What Do All I Need ? | Ohio Sportsman - Your Ohio Hunting and Fishing . . .
Just got a Traditions Fox River 54 percussion cap muzzle loader and not sure what all I need and how to set up to shoot Came with some caps and I do know where they go and it came with some patches and balls So do i get some powder and put say 100 grains of powder down the barrel and lube a
- Creek bed treasures | Ohio Sportsman - Your Ohio Hunting and Fishing . . .
Found this stuff walking Beaver Creek the other day: an old aluminum cooking pot, a genuine zinc cap for a mason jar, various critter bones, and my favorite a vintage Westinghouse Mazda lightbulb petfectly intact How cool!
- Homemade deer feeders | Ohio Sportsman - Your Ohio Hunting and Fishing . . .
-PVC end cap -3 small 2" bolts (size of your choice) and nuts -2 small 1" wood screws 1 Cut the PVC to the length you need Mine are about 3' or so long 2 Notch one end of the PVC with several evenly spaced 1 4" deep notches On the 4" PVC I used 3 notches, on the 10" PVC I think it was 7 The notches should be about 1 1 2" long and 1 4
- Brush lodged in my muzzleloader barrel help | Ohio Sportsman - Your . . .
I have an old cap and ball muzzleloader I was cleaning it today and the brush snapped off inside of the barrel Does anyone know a way to get this out Keep in mind the breech is on the side of the barrel and that hole is about a quarter inch Thx
|
|
|