|
- Mt Everest Radio Comms? - RadioReference. com Forums
In order for the TV production crews to have 2-way radio communications with established Mt Everest business services and the Sherpa People working with Discovery Channel Production, we just used established 2-Meter Amateur Radio Frequencies
- Airspy HF Discovery and DSDplus how do I get it going?
I have Been using a Airspy HF discovery and have tried to get DSDPlus up and going on this any tips or tricks?
- Discovery mode issue - RadioReference. com Forums
ive been using discovery mode on all my 436 536 sds100 units for many years and have always had what appears to be an issue the idea of discovery, is to find new frequencies talk groups i can set to 600 seconds recording per talk group or frequency, and once it reaches that time limit, it
- DSD+ and Airspy HF+ Discovery not being found?
The Discovery works just fine for the VHF band It works well with SDR Console, SDR# and SDR++ The serial number being used is the one that is reported by SDR Console and SDR++ - SDR# reports only the first fifteen digits of the serial number, SDR Console and SDR++ report all 16 digits So, every application but DSD+ works DSD+appears to be unable to see the device when everything else can
- HF Crab Fishing Frequencies - RadioReference. com Forums
If you look at the Grove top 1000 frequencies link in our wiki, you will see that there are sections of 4,6,8, 12, 16 mhz set aside for ship-shore work However, hearing these fishing fleets given propagation as crappy as it is would be very tough, but not totally out of the question I would suspect they would rather be using VHF Marine freqs instead of HF, personally It would likely be much
- Can you listen to lightning? - RadioReference. com Forums
This is all started when I was watching lightning and remembered a show on the discovery channel about scientists launching rockets with copper wire attached and causing a lightning strike I remembered them talking about the sounds of lightning I just wanted to hear these sounds Tell my fiancee "Well, at least I know what lightning sounds
- Airspy Firmware Update for Airspy HF+ Dual and Airspy HF+ Discovery
My computer runs Windows 10 and this "update" turned my HF+ Discovery into a brick Reading from airspy us' non-responsive "customer service," I'm very dismayed The good is that the Airspy HF+ Discovery is nearly impossible to brick If you would describe what you did so far, then hopefully a firmware update will be successful
- How to program a simplex channel (no repeater) for DMR
Many are programming the DMR channel as a conventional freq with DMR enabled The trouble is that the user also has a TG and the scanner cannot decode the user properly without this information Below are the steps I have used to successfully program in a simplex DMR channel and have it receive properly
|
|
|