- 1G - WARNING!!!! Front Lower Control Arms; Dorman vs. Raybestos
Dorman and Raybestos both make aftermarket replacement control arms available through Rock Auto The Dorman lists for around $60 a piece, and Raybestos for around $160 a piece Recently I purchased a set of Energy Suspension lower front control arm bushings to replace the worn out stock bushings on my car
- Harmonic Balancer failure. . again NAPA Dorman | DSMtuners. com
About a month ago, i learned that my harmonic balancer had faild after investigating a wierd knock The rubber had deteriorated and the outer ring of metal had seperated and started slapping the crank case Took it off and replaced it with one from NAPA, and within a day I could hear that same
- 1G - Spectra vs Dorman oil pan. . | DSMtuners. com
SasaniFab Proven Member 2,432 786 Dec 1, 2013 Mexico, Connecticut Go to rock auto and get yourself a pioneer oil pan, made in Canada good quality pans I wasn't impressed by the Dorman
- Aftermarket Control Arms (AcDelco, Moog, Raybestos, Deeza, Dorman . . .
I am about to change all of my frt control arms I am not going with Misubishi OEM parts, So my question is what brand has the best quality parts (don't take money into consideration)? AcDelco, Moog, Raybestos, Deeza, Dorman, Mevotech, Beck Arnley, OES Genuine, Replacement?This is all for
- Aftermarket brands you trust for OEM replacement parts
On the other hand, I'm skeptical about parts made by the likes of Dorman, Standard Motor Products, Anchor, Gates (belts), Cardone, and generic parts store brands like Duralast I suppose at one point or another I've used these brands and either had premature failure or fitment issue Curious to hear what you guys think
- lower control arms with lifetime warranty - DSMtuners. com
I thought I would share this gem of knowledge I picked up today looking for lower control arms at autozone First they offer lifetime warranty lower control arms NICE! Second, you should be aware of something The duralast lower control arms PN's: FA4077, FA4078Come from either japan or
- Oem vs felpro vs ajusa composite head gasket. | DSMtuners. com
I haven't heard any bad reviews in regards to the felpro Only that its cheaper than the Oem We are talking about composite gaskets only and which one outperforms the rest I had mentioned only the oem, ajusa and felpro since those are the only ones that I know about I contacted jackon auto machine for some information in regards to the ajusa composite head gasket, since they are the only
- OEM knock sensor vs Autozone Knock Sensor | DSMtuners. com
I have just purchased an OEM knock sensor from a DSM part vendor and I am trying to find what the difference is between the AutoZone knock sensor and the OEM knock sensor With them sitting side by side, you would never know which one is OEM The wire colors are exactly the same, the part
|