|
- 1G - WARNING!!!! Front Lower Control Arms; Dorman vs. Raybestos
Dorman and Raybestos both make aftermarket replacement control arms available through Rock Auto The Dorman lists for around $60 a peice, and Raybestos for around $160 a peice Recently I purchased a set of Energy Suspension lower front control arm bushings to replace the worn out stock bushings on my car
- 1G - Spectra vs Dorman oil pan. . | DSMtuners. com
SasaniFab Proven Member 2,432 784 Dec 1, 2013 Mexico, Connecticut Go to rock auto and get yourself a pioneer oil pan, made in Canada good quality pans I wasn't impressed by the Dorman
- Harmonic Balancer failure. . again NAPA Dorman | DSMtuners. com
About a month ago, i learned that my harmonic balancer had faild after investigating a wierd knock The rubber had deteriorated and the outer ring of metal had seperated and started slapping the crank case Took it off and replaced it with one from NAPA, and within a day I could hear that same
- 2G - Adjusting front camber in 2024 on 2G stock arms
The Dorman 545-010 is listed as being compatible with AWD on other sites such as Summit With that being said and us knowing that the front suspension is the same on a FWD , I’m sure they’ll fit I’ve also considered the Moog K7452 Ball Joints, but I don’t love the design of them as you’ll be adjusting caster simultaneous to camber
- replace CV boot without removing axle? | DSMtuners. com
1 Purchased dorman uni-fit neoprene boot kit ($12 from rock auto) 2 Removed splash shield for better access 3 Knocked upper control arm loose with mini sledge 4 Pulled apart remainder of boot, and pulled the whole spider out of the tulip 5 Snipped off old clamps, removed base of old boot and trimmed the thick end off (as per instructions) 6
- OEM knock sensor vs Autozone Knock Sensor | DSMtuners. com
I have just purchased an OEM knock sensor from a DSM part vendor and I am trying to find what the difference is between the AutoZone knock sensor and the OEM knock sensor With them sitting side by side, you would never know which one is OEM The wire colors are exactly the same, the part
- 1g Clutch PEDAL Adjustment??? | DSMtuners. com
This may come as a shock to you, but NAPA doesn't build their own parts Whatever clutch hydraulics you recieve from them will be built by one of these manufacturers in a NAPA box: - Bendix - Dorman - Raybestos - Rhino Pac (normally made in Japan or Canada of Chinese components) - Wagner ~ Jus Rebuilding your journal bearing turbochargers since
- Oem vs felpro vs ajusa composite head gasket. | DSMtuners. com
I haven't heard any bad reviews in regards to the felpro Only that its cheaper than the Oem We are talking about composite gaskets only and which one outperforms the rest I had mentioned only the oem, ajusa and felpro since those are the only ones that I know about I contacted jackon auto machine for some information in regards to the ajusa composite head gasket, since they are the only
|
|
|