Race Spec Wastegate Position Sensor These sensors in their original form terminate to a mating connector that is no longer made by the original manufacturer - resulting in poor quality and heat tolerance The sensors are modified, terminated, potted, and sealed with a Raychem System 25 straight boot
What is OBD-II Code P2B93 - Wastegate Position Sensor A Exceeded . . . It works by regulating the flow of exhaust gases that drive the turbocharger turbine The wastegate position sensor A is an electronic device fitted on the wastegate actuator or solenoid that detects and reports the position of the wastegate
Wastegate position sensor signal short to B+ [123701] - BIMMERPOST Hello guys, I am currently experiencing a weird error on my F36, B48 car (no mods) I am getting this error: Electric wastegate valve, position sensor, signal: Short circuit to B+ (123701) The fault is detected if the sensor voltage is above the limit value This actuator has 5 pins
Electric Wastegate - support. haltech. com A Wastegate Valve Position Sensor can be used to monitor wastegate valve position and behaviour It can be used to diagnose manifold pressure balance issues in twin-turbo applications and give insight into wastegate flow characteristics
Wastegate Position Sensor | Yellow Bullet Forums Turbosmart completely reengineered their line of Powergate wastegates and Power Port BOV's They are using a new position sensor that is non-contact and has no moving parts