|
- What is an electrode? - Electrical Engineering Stack Exchange
3 According to wiki, an electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit (e g a semiconductor, an electrolyte or a vacuum) Examples of electrodes are the cathode and anode
- How does a driven right leg work? - Electrical Engineering Stack Exchange
The most common and effective use of the third electrode is to connect it to a driven-right-leg circuit [2], [3] This circuit overcomes both of the problems listed above It reduces the effective electrode resistance by several orders of magnitude, and it allows only a safe amount of current to flow through the third electrode
- Why cyclic voltammetry requires three electrodes?
Why do you need both a reference electrode and a counter electrode? Why measuring the current between the reference electrode and the working electrode is not enough? Three-electrode setup: (1) working electrode; (2) auxiliary electrode; (3) reference electrode
- interconnect - How to properly connect metallic conductors to graphite . . .
I want to prepare graphite electrodes for electrolytic experiments I am therefore looking for good ideas on how to get very intimate, long term stable and low resistance connection between the
- How do I connect a female EEG electrode to a breadboard?
1 Electrode output end: EEG electrode: I'm trying to connect the output of EEG electrodes to a breadboard as input How do I connect the electrode to the breadboard? Usual jumper wires don't seem to fit and adding normal wires and soldering them isn't possible
- Capacitance displacement probe guard ring circuitry
Simply connecting the sensing electrode to the guard ring would accomplish this, but it wouldn't work as the edge effects at the guard ring would be included in the measurement, defeating the entire purpose of the guard ring
- sensor - How to do water detection with a single electrode . . .
Is the electrode imposed? If not, you can easily have a single electrode in a "mechanical" sens (ie a single stick) but with 2 distinct electrodes from an electric poitn of view A very simple solution would be a small strip cut out of a stripline prototyping PCB where you keep just 2 parallel copper lines Of course, if it is for long term use, you might want some material less subject to
- Are electrode based, water level monitoring systems safe?
I could manufacture or purchase an electrode system without exposed electric cables, and using mostly innocuous plastics as rigid PVC for water or polyethylene with small exposed electrodes made of copper or stainless steel, solving the first issue
|
|
|