|
- Trouble with APEX FMM | Reef2Reef
I recently updated my old Apex classic to the new in hopes of eventually getting a trident I also added a FMM as I wanted to add an extra layer of protection on my ATO with optical sensor and get a leak detector and flow sensors When it all works its great but I have been having the FMM
- Neptune Apex Programming Tutorials, Part 3: Automatic Top-Off Kit (ATK)
Let’s walk through each line: Fallback OFF — instructs the Apex to turn off this output if the Apex ever gets disconnected from the FMM This could also apply if the Apex locks up and becomes unresponsive (which rarely happens) This just basically means don’t run the program if the Apex unit isn’t in control of the situation
- Neptune Apex Programming Tutorials, Part 3: Automatic Top-Off Kit (ATK)
Part 3 of our series on learning how to program your Neptune Apex for automatic top-off in a saltwater aquarium
- Neptune FMM module issues | Reef2Reef
So I have the FMM module that cam with the ATK kit I have the two optical sensors that came with the ATK, One 15 inche LLS, and one Leak Detection Over the weekend this module would show as missing and not sure why Unplugging it reset everything and started working again Now the issue I
- Trouble shooting Neptune ATK | Reef2Reef
It should be supplying power to the FMM at all times 2_1 is the outlet on the FMM itself, that is where the PMUP is plugged into and that is where you want to control the PMUP from
- FMM disconnected | Reef2Reef
My FMM is showing disconnected and the optical sensors are not responding to state changes thus my ATO is not currently working I have disconnected both USBs into my FMM so the light turns out, wait approximately 30 seconds and replug in The light is showing green but it is still showing disconnected on Fusion Any suggestions?
- Apex controller FMM ports | Reef2Reef
Oh, I didn't realize the Apex 3 has built in FMM ports So it sounds like you went to the Modules screen and clicked on the FMM_X module and in the configure dropdown, selected Delete?
- Hooking up a third party float valve to Apex FMM and programming it.
Okay, so my question is, I want to connect this third party float valve to the empty port on my FMM I tried calling Apex, and didn't get much clarity If I hook up this float valve that has a hot and ground to this male aux port, and plug it into my FMM, will the FMM know what to do with it
|
|
|