|
- Solved: Extruding at an angle? - Autodesk Community
there is an angle manipulator in Extrude, but it is for setting the draft angle on the Extrude It's not really for Extruding at an angle For that, you need Sweep - define another sketch with a line at the angle you want, then use Sweep to create that angled "extrusion" Here is the draft angle manipulator: Jeff Strater (Fusion development)
- Solved: Reveals + Splitting Wall Surface - Autodesk Community
I would rather use a single wall, place V-shaped reveals, create parts from the wall, and split parts where the reveals are there you have more control over material options for different panels (parts) without messing up with split face and paint
- Solved: Upside down lighting fixtures - Autodesk Community
Place on face hosting will flip the fixture to the correct orientation in the Ceiling Plan Without using the reflected Ceiling Plan the best method is in an elevation view draw a reference plane from RIGHT to LEFT and name it and set the elevation
- How to add text in new autodesk fusion 360 - also can you still . . .
How do you add text in new autodesk fusion 360? Can you still download legacy? I knew how to do this in legacy
- Solved: Change Family Host Type - Autodesk Community
Therefore, Families that are hosted to a Face are necessary Any of these element-specific Families can be converted to Face-Based with the following procedure: 1 Create a new Project and draw a Wall, Floor, or Ceiling - which ever element is an appropriate host 2 Load in the desired Family and place one instance of each Type on the host
- Cannot place families on linked models - Autodesk Community
Your only real option is to use "face-based" families instead of wall hosted families Revit will recognize the face of a linked object (i e wall), but doesn't allow for wall hosting through linked models Using linked models is very common in the professional world MEP folks link in Arch Struct models all the time
- Creating lines or faces between points? - Autodesk Community
Creating lines or faces between points? Anonymous Not applicable 01-24-2017 04:28 AM 9,929 Views 8 Replies LinkedIn X (Twitter) Facebook Message 1 of 9
- Solved: How do I flip invert faces - Autodesk Community
With the "Normals" Menu removed from the Maya Hotbox, how do I flip faces? to get the correct face to show (not show black, but show gray)
|
|
|