|
- 340 Marine Engine Questions - Allpar Forums
Welcome to Allpar I've seen Flathead 6's big block Chrysler inboards, but not a 340 This is an older manual, but covers the Marine V8's Some engines ran CCW
- Smoke coming from breathers on flathead six | Allpar Forums
While driving my 50 coronet, I noticed smoke coming into the car and out from under the hood What would cause that?
- Industrial flat head six - Allpar Forums
I have a machine with a Chrysler industrial flat head six and need a starter The numbers are autolote part # 670662 There are other #’s AX4048 12 stamped vertically in front of HO 26213 12 volt starter Can anyone tell me where l can find a replacement ?? You can email me at
- Chrysler Flathead 8 block - Allpar Forums
Looking for information on a Chrysler Flathead Straight-8 engine Wikipedia states that it exists But I find very little information, and the photos of this engine are in poor quality And on the ones that I find, the cylinder block on the side does not look like a Flathead Straight-6 and
- All engines used in Chrysler Corporation cars and trucks
The "big" Chrysler flathead eight was a 385 cubic inch engine (384 8 to be exact) made from 1931-37 for the CG, CH, CL, CW, and CW*; it had a bore of 3 5 inches and a stroke of 5 inches 8 0 V-10 Viper, Ram trucks (Ram version used through end of 2002) Some Details Gary Howell clarified: Small blocks 273 318 340 360 are LA engines, and they look the same from the outside 273 cu in 1964-69
- AMC V8 Engines - Allpar Forums
AMC V8 Engines By Mike Sealey AMC VIN decoding Brazilian Kaiser Willys Jeep engines American Motors' first family of homegrown V8s is not well known to most enthusiasts, and there is a great deal of confusion about their origins Those who are lucky enough to have made their acquaintance know
- not having an oil filter - Allpar Forums
The flathead 6 was never updated to include a full flow system The current aftermarket system could possibly be modified with a restrictor as used on the original system which probably was only about 2-3 gpm rated The original system only had 1 8" or 1 4" pipe fitting connections (with a restrictor in the in side fitting usually at the block)
- Dodge Chrysler 2. 7 Liter V6 Engines - Allpar Forums
The combustion chamber of the 2 7 was a pent-roof design, with center-mounted spark plugs Rocker arms with roller followers were similar to those of the 2 0 liter four-cylinder All the 2 7 engines had coil on plug ignition, with no spark plug cables, and sequential multiple point fuel injection The power output per liter ended up being the highest of any Chrysler V-engine, at 74 hp liter
|
|
|