|
- The new Athlon Ares BTR G3 2. 5-15x50, initials, and ongoing thoughts.
The G3 Ares BTR 4 5-27 has a 30mm tube with 50mm objective It has 24 mils travel and like you said is lighter weight The turrets don't lock and the windage is exposed The ETR G2 4 5-30 is the heaviest at 36 oz, has 32 mils travel and locking windage Likely the best Chinese glass
- Gunsmithing - HK G3 match grade barrel | Snipers Hide Forum
Just pressing out the old G3 barrel and pressing in a new "match" barrel, while certainly an "upgrade" won't necessarily give you "match" quality results at the end of the day Lots going into the accuracy equation with any HK roller-lock type built
- UF Pro or Crye Precision pants | Snipers Hide Forum
Looking at UF Pro Striker HT pants or Crye Precision G3 combat pants For those with experience with both which would you go with? I was going to go with Crye's but read good things about the UF Pro so I'm considering them especially since Terry Cross recommends them I'm 6'1" , 210lbs , 34 32
- How to reload the spent brass from HK G3 rifles. - Snipers Hide
Re: How to reload the spent brass from HK G3 rifles just run them thru the sizing die to round it out anything that doesnt come out will fireform out the ridges will come put when you resize them you might want to invest in a shell deflector for your guns, i made one for mine out of a small seagull shaped piece of metal at the ejection port and it doesnt beat the brass up or throw the brass
- H K G3 | Snipers Hide Forum
Re: H K G3 WOW this is very cool, how did you add the ctr to the g3 end cap thing, this seems like a big advantage for control, nice work
- Night Vision - ITT G3s | Snipers Hide Forum
Re: ITT G3's They work fine I just dont know how much they have been used I was told they probably have less than 50 hrs on them All I have is the goggle and a black ITT bag I do believe they are Gen 3 because they are waaaaayyyyyyyyy clearer than a Gen 2 monocular I have looked thru
- Rifle Scopes - PTR91(HKg3 clone) Optics Recomendations
As for optics the length of the scope, combined with the size of the bell is the biggest difficulty in mounting a scope to any HK91 G3 type clone rifle, including your PTR-91 Like others have said, the longer the scope, and larger the bell, the more difficult it can make proper operation of the cocking lever
- Belgian OIP 3. 6X G3 Scope - Snipers Hide
I got this G3 OIP scope today, including the HK claw mount, for $120 :) The scope was issued as a DMR scope for the AG3 in the Norwegian army in the 70'ies The scope and mount is in 95%+ condition BDC is from 100 - 800m with 50m clicks after 200m (Note the velcro pads that keep the lens
|
|
|