|
- Hornady 3-1 vs. other automated case trimmers? - Snipers Hide
I’m considering upgrading my brass trimming setup and am particularly interested in the Hornady 3-in-1 Power Case Trimmer Its capability to trim, chamfer, and deburr simultaneously sounds appealing However, since I reload for 10+ rifles and regularly add more calibers, having a trimmer that
- Setting up Hornady Sizing Die | Snipers Hide Forum
Re: Setting up Hornady Sizing Die The 'right' answer is to follow the manufacturer's instructions The 'correct' answer is to measure the case shoulder on brass fired in your rifle with an appropriate gauge (reference Hornady Headspace Kit or equivalent) and then adjust your die to bump the shoulder back 2 or 3 thousandths (1 or 2 on a bolt rifle) The difference is the 'right' way can
- Hornadys new ELD VT | Snipers Hide Forum
Here is a novel idea: How about Hornady make a 60ish grain variant that can actually be used in existing AR15s Then everybody is happy Hey man, we can't alter fluid mechanics You need ogive length to get the BC 5 56 223 doesn't have it at magazine length That's why the 75gr ELD-M beats the 73gr ELDM, 75gr BTHP, 77gr SMK, etc
- 338 ARC Load Data | Snipers Hide Forum
Started some load development for the 338 ARC in Quickloads Just waiting on a 10" 1:6 5 McGowen Precision Barrel and a full length sizing die from Hornady
- Eld-x bullets as good as others? | Snipers Hide Forum
Fixing to enter the handloading world once I get all my equipment in I always seem to come across the hornady ELD-x bullets and always at a lower cost than others Is the hornady eld-x bullets any comparison to like the partition or TTS bullets? Right now I have a few boxes of factory hornady
- 7mm PRC -- Published load data from Hornady - Snipers Hide
New published for 7mm PRC data showing 175-180 gr projectiles at 2950 to 3000 fps
- Hornady Sub-X 175 grain 30-30 subsonic load data?
If you have had success loading subsonic rounds in a 30-30 using Hornady Sub-X 175 grain bullets I'd appreciate it if you shared your preferred powder and load data
- 160gr. Hornady FTX Load Data (30-30Win) - Snipers Hide
Re: 160gr Hornady FTX Load Data (30-30Win) I am getting ready to load up some using Varget If I am not satisfied with the results I planned on picking up some of the new powder as well I am also interested to see some load data The factory Lever Evolution shot very well in my Marlin 336 out to 250
|
|
|