|
- Broken fuel line connector on underside of tank | Cafe Husky
Bike is a TE310R I've read of this happening to people, so was super careful when i lifted tank to access the connector for the fuel line As soon as I pressed the release clips in it snapped away! Not sure what they've made that elbow join out of but it is brittle! Pics below but just
- husqvarna engine number location? - Cafe Husky
Just bought a Husqvarna and I think its a 1980, but need to locate the engine number to see what model it is ,can't seem to locate it Any information would be appreciated! First husky ever purchased and kind of unfamiliar with them Here's a pic! It needs some restoration for sure! It's been
- Crankcase breather spewing oil - Cafe Husky
I have just returned from a 1500km trip of mostly highway riding at speeds averaging around 100-110km h I noted a significant amount of oil emitting from the crankcase breather during the trip, but not enough to consider it a major concern However, I have since checked the oil level and found
- Buying a Husqvarna TE 450 510 06-08 | Cafe Husky
I had over 400hrs with minor typical Husky gremlins (clutch slave o-ring,fork seals, melted overflow bottle, mid-pipe burn) Strong and reliable as an ox, but faster
- ignition timing | Cafe Husky
Does anyone know the timing for 82 430wr with a SEM ignition? I have a manual but it doesn't show any technical info
- TR650 Lowering Options | Cafe Husky
After riding my new Terra for a couple days, I found it a bit too tall for my modest inseam Even with the spring pre-load at its lowest setting, only my tippy-toes could touch the ground on both sides Rather than wait for the bike to settle over time, I decided to install a Kouba Lowering
- FE FC - re-springing my FE350 | Cafe Husky
Just got a brand new FE350s and of course I'm STOKED but I weigh 230 pounds and the manual says the bike is sprung for a rider between 165 and 187 pounds, so it looks like I need to install some new springs From reading the manual it appears I need to go to 4 6 N mm in the forks and 6 0
- Stator Rewind | Cafe Husky
Has anybody had their stator rewound? On my 09 TE510 my stator is dying, so instead of buying a new one from Husky I was thinking of having it rewound back to what it is or for more output if possible Anybody had this done before and if so who by? Dustin
|
|
|