- Options for improving TR650 forks. . . . - Cafe Husky
The lowers wouldn't swap between a 46 and 48, but they are a cheap, readily available fork on the used market, and are very adjustable The wheel options would be pretty much, cast 17s or anything you can spoke to a YZ, Husky, Honda, etc, front rim
- Blown Crankseal -- DIY How to? | Cafe Husky
I recently purchased an 83 Husky WR 250 (with an 82 engine) that had been sitting for nearly 3 years The bike was clean and it started right up One thing I did notice however, was that a half-dollared blob of oil had spurted from the vent tube when the owner started -- I figured that the
- Cafe Husky
Husqvarna motorcyclesHi everyone, As you all know, Coffee (Dean) passed away a couple of years ago I am Dean's ex-wife's husband and happen to have spent my career in tech Over the years, I occasionally helped Dean with various tech issues When he passed, I worked with his kids to gather the necessary credentials to keep this site running Since then (and for however long they worked with
- 250-500cc - WR WXE 250, 1994 -1999 Changes?? | Cafe Husky
Hi all, new husky owner, very tidy low use 1995 WR 250 Bike seems pretty good all over with the exception of faded cracking plastics to be expected with
- FE FC - Gearing on the 501 FE | Cafe Husky
The oem 13 50 is too tall for my taste in the open desert and Baja, so I went to my trusty web site, Gearing Commander No Husky 501 FE, so I entered the info and within a week they checked my info and emailed me to let me the bike was verified and added to the data base If you have never
- 1975 gp250 engine in 1974 cr250 mag frame | Cafe Husky
putting my 1975 gp250 engine in a 1974 cr250 mag frame need any advice or help available my exhaust will not fit the mag frame from the gp250, nor airbox
- Jetting | Cafe Husky
390 ?'s Husky T- 12 53 or 13 56 work best for moto depending on track type I use counter-sunk bolts on my '82 hub sprocket and once they're seated in (with Locktite) they never loosen Coffee- George Erl's number is 714-540-2920, located 111 W Dyer Rd , Santa Ana 92707 Huskydoggg- what carb, jetting, pre-mix, plug and gear combo are you running?
- 82 83 Husqvarna cr500 test stats | Cafe Husky
Some cr500 stats, https: yeoldecycleshoppe squarespace com roadtestlibrary 2017 2 28 1983-husqvarna-500-cr-road-test I notice this 82 cr500 uses the side access door
|