|
- CAT HYDO Hydraulic Oil Alternatives? - Heavy Equipment Forums
An SAE10W hydraulic oil from any reputable oil company (Mobil, Shell, Conco, etc) would be my suggestion They will all produce an oil of an equivalent specification to Cat HYDO 10W Mobil used to produce the oil for Cat, I'm not sure if they still do Look for any oil that passes the Eaton Vickers 35VQ25 Vane Pump test, that is a good guideline Beware of spec sheets that say "designed to
- 453 bobcat - Heavy Equipment Forums
I have a 453 bobcat with a hydro leak it would leak even with the machine off I got the engine and the hydro pump removed it looks like it is leaking at the bottom of the control valve someone told me it was the valve spools what is the best way to fix this if i take the whole valve
- Problems with a Hydroax - Heavy Equipment Forums
Hey everyone I have a hydroax 621B had a total failure of both the hydraulic pumps both the big pumps and the smaller auxiliary pumps attached to them were rebuilt and i put the machine back to work in the month or so she has been back to work, I have blown a seal 4 times now between one of
- Hydro Ax 411EX | Heavy Equipment Forums
I'm considering buying a 1998 Hydro Ax 411EX that was used as a feller buncher It comes without the head and I would buy a used 8' rotary ax mower that came with the older model Hydro Ax I have a couple of hundred acres of heavy brush to mow that is 10' to 15' tall with a base of 2" to 4" The
- CAT Hydo Advanced 10 vs ISO 32 - Heavy Equipment Forums
I have a 2012 CAT 252B3 with 2,400 hours on it and C3 4 engine s n TNK01281 and yesterday while running the snow blower, the fan motor on the blower apparently lost its bearings and dyed all the snow coming out of the chute a nice hydraulic oil yellow My plan was to buy CAT Hydo Advanced 10 to
- Cat Hydraulic Fluid Alternative - Heavy Equipment Forums
I need to get some hydraulic fluid for my 906m What are you guys using?
- 84 F600 Hydro boost? | Page 4 | Heavy Equipment Forums
Should remain same as new hydro pump is activating p-brake so pressure is restored there 2) Test and inspect emg motor relay for stuck contact 3) Pull the pressure transducer switches to see which one may be culprit I suppose the actual hydro-booster pump could be issue, but pedal seems ok and normal
- Help operating a Hydro-Ax 670 | Heavy Equipment Forums
Blount (is or was, not sure if they sold) owns both Hydro AX and Prentice as well as a bunch of other logging equipment manufacturers RMS has been a distributor for many years
|
|
|