|
- Valve adjustment really necessary? | Honda Accord Forums - The . . .
What can I expect from doing a valve adjustment on my v6 engine with 112k? Increased performance? wondering if it's worth the trouble
- Is brake fluid change really necessary? - Drive Accord Honda Forums
I was reading through the manual for our 2014 Honda Accord and noticed it recommended replacing the brake fluid every 3 years I have owned three Hondas (1990, 1995, and currently a 2004) that all had have over 250,000 miles I have never done anything with the brake fluid with those three cars
- Why breaking in a barrel is NOT necessary - Snipers Hide
Re: Why "breaking in" a barrel is NOT necessary The reason that the barrels change velocit is the bore actualy work hardens and if you fire yout rifles at say 500 yards you can see an elevation shift somewhere around 50 to 80 rounds then they usualy settle down the reason to break in barrels is to smoth out the burs in the throat
- will honda dealer replace all necessary parts for timing. . .
When I dropped off the car, I confirmed again that everything was being replaced, and they assured me it was a full kit with all necessary parts Today, when I picked up the vehicle, the invoice only listed: Timing belt (with part #) Water pump (with part #) Tensioner (with part #) Radiator flush Coolant (with part #)
- How Much Interior Disassembly Will Be Necessary?
And I’m afraid that the necessary disassembly and reassembly of the interior will result in a symphony of rattles and squeaks that will drive me nuts! So I’m asking here if anyone has experience with either how much of the interior would have to come apart to do this work, and how well the interiors on these Accords go back together
- Suppressors - DIY Suppressor alignment gauges - Snipers Hide
Are you really suggesting that an additional 0 004" is necessary as a no-go suppressor gauge? You're much braver than me or don't mind launching the occasional can downrange Why would a more precise rod put you at risk of launching a suppressor? And yes I’m suggesting that 295 is way too small for what Im doing
- Is a S-VCM absolutely necessary for 9th gen V6?
I've been told I need to get an S-VCM module as soon as possible to disable vcm on my 9th gen due to uneven piston wear and generally extra wear being caused by the VCM However I've also read that those issues only pertain to the 8th gen and they were all resolved with the 9th gen Any
- Is Valve Adjustment Necessary? - Drive Accord Honda Forums
What does your owner's manual say to do? That would be a good place to start to see if a maintenance procedure is necessary or not, and when it should be done based on mileage time
|
|
|