|
- Inconsistent Peer VLAN ID - Cisco Community
I'm having some trouble trying to figure out why I'm getting the following errors in my logs This morning, for the first time in over a year, my switch stopped communicating with my core switch, so I checked the log Feb 27 16:25:15 364 UTC: %SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsi
- Provision Catalyst 9300 switch to Catalyst Center - Cisco Community
PKI Config push Failed - Unable to push configuration to device ip x x x x Device response - inconsistent value: Device refused one or more commands This means a command (or more) in the template is incompatible with the 9300 If the template works with 3650 3850, start checking the uplink config because this could one of the culprits
- Solved: spanning tree root guard command - Cisco Community
in my LAN the all access layer switchs stacks are connected directly to core backbone switch (cisco 6509) via sfp fiber-optic i want to protect my spanning tree setup with the "root guard" command 1 where would i set this ? on uplink ports on access layer switches ? or on core backbone ports to
- Solved: %Inconsistent address and mask - Cisco Community
Start a conversation Cisco Community Technology and Support Networking Switching %Inconsistent address and mask Bookmark | Subscribe
- Received BPDU with inconsistent peer vlan id 2 on Port-channel3 VLAN4
The switches are not rebooting or having links that change status before the appearing of the log "Received BPDU with inconsistent peer vlan id 2 on Port-channel3 VLAN4" so I'm at a point that thinking about something else is becoming difficult
- ipv6 between nx os nexus 7K and ASA firewall - Cisco Community
Hi - I'm receiving a strange message from my Nexus 7010: Jan 30 09:45:22 10 1 3 1 : 2012 Jan 30 09:45:22 EST: %ICMPV6-3-ND_LOG: icmpv6 [4740] Inconsistent RA retrans-timer on Vlan24, ours is: 0, from fe80::21b:54ff:fef7:9205 Jan 30 09:45:22 10 1 3 1 : 2012 Jan 30 09:45:22 EST: %ICMPV6-3-ND_RA_
- 已解决: 生成树问题，日志总是有这个错误！ - Cisco Community
Inconsistent peer vlan %SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsistent peer vlan id 100 on GigabitEthernet0 49 VLAN1 0 49口是trunk口，对端和本端的本征native都是vlan1，需要怎么配置才不报这个错误，谢谢各位大神 我也有相同问题 标签: 其它交换相关 4 有帮助
- Inconsistent peer vlan and Inconsistent local vlan - Cisco Community
This makes Nexus complaining about inconsistent peer vlan and Inconsistent local vlan In short, I need to "translate" vlans 31,32,33 into vlan 21 Vlan translation 1-to-1 won't work as I can't add multiple entry with same translated vlan Vlan translation n-to-1 won't work as it makes QinQ (as far as I get it from documentation)
|
|
|