|
- Radtel RT-880 programming | RadioReference. com Forums
He had so much input and pre-amp gain running that when he was playing, he got that great sound, but as soon as he stopped it went into feedback from all the gain The 880 does something similar in that when a station that's been full-quieting shuts off, the receiver starts roaring static
- DSDPlus - DSD Plus stopped outputting audio – no audio input device . . .
Hello, everyone, Without any changes on my end, DSD Plus suddenly stopped displaying the "audio input device" It still decodes, but there is no audio output to the speakers I have already reinstalled both my sound drivers and VB-Cable Below are screenshots of the bat files and the program
- Audio Isolation Transformer. Why you need one.
Video below of Big Clive dissecting a stereo isolation transformer Similar ones were sold by Radio Shack and likely still available One of these can serve two receivers and two sound car inputs Note the beefy transfromers inside There are cheap tiny versions on Amazon that are probably junk and may not actually have transformers inside, just capacitors to lift the voltage from the audio
- Changing audio input on DSD+ - RadioReference. com Forums
Having issues piping audio from SDR# to DSD+ on my laptop On my desktop, it works fine because DSD recognizes the VB cable as the only audio input source On laptop, the laptop microphone appears as audio input device 1, so no audio comes through to DSD Otherwise, SDR sharp works good
- Frequency setting in CHIRP software . . . - RadioReference. com Forums
Joined Dec 19, 2002 Messages 12,330 Reaction score 4,565 Location Wichita Falls, TX Apr 24, 2018 #7 shanefawks said: Hi i am trying to put in a input frequency for my fire repeater 154 13000 I can find it on the chirp software what am I missing thank u
- baofeng uv-5ra and PLs DPLs on repeaters
At work we use motorola ht750's, cp200's, and xpr6100's (digital) we have a repeater with a input of 469 0250 and output of 464 0250 standard 5+ offset I dont know the PL tone but i found the DPL is 723 I can hear all radio traffic on the output with the DPL programmed but i cant key other radios the repeater even if im within a few feet
- DSD Plus - file as input - RadioReference. com Forums
I am using SDR# to capture data for DSD Plus, but not getting expected results So, trying to decode using mp3 files as input but don't know how to give mp3 file as input Someone please help me Thanks in advnace
- APX6500 Accessory Connector - RadioReference. com Forums
The nominal input level is 80mVrms for 60% deviation when used for motorcycle, but can also support 300 mVrms for future APCO accessories The DC impedance is 660 ohms and the AC impedance is 560 ohms (6) See Table 2-1 in Chapter 2 for wiring options
|
|
|