|
- Pick n Pull junkyards in nj? - Nissan Forum | Nissan Forums
t e auto wreckers in woodbridge rahway they are a pick and pull junkyard last time i went they had a older 89 90 sohc 240sx in the back of the yard Top Sr20Det20
- Please help identifying a VLSD - Nissan Forum | Nissan Forums
And hit-up your local junkyard to some cheap prices I know Pick-n-Pull had half off on all Wednesdays If you wont find 5 bolt flange on J30, you might find 6 bolt in 3 by 2 pattern Just snatch those and try it on your diff They come out really easy, when you tap on them all little with a hammer
- How To: 5 Speed Swap in Convertibles (and other S13s)
First, you'll need to pull the old transmission out Drain the trans fluid from it to lessen the nasty factor a little While you're waiting for the fluid to drain, go ahead and pull the center console It's only held on by 6 screws and pulls right off Next, disconnect the shifter, unbolt it, and disconnect it from the selector lever
- towing with a d21 - Nissan Forum - Nissan Forum | Nissan Forums
obviusly the VG will out pull the 4 bangers That said, none of these engines are powerhouses How heavy a trailer do you plan to pull? I know the VG with the auto trans is rated at 5000 lbs, but it would really struggle with something that heavy, especially if there's any hills around Half of that is probably more reasonable
- Understanding Driveshafts - Nissan Forum | Nissan Forums
There was a listing at O'reilly's for a 1310 u-joint, but the damn thing was $45 99, a bit rich for that part in my opinion What really sucked was the driveline I got from Pick-N-Pull here had greasable u-joints but they are sloppy or movable in the yoke, like the cups slide both ways guess that will be my emergency spare
- Cruise Control will not engage - Nissan Forum | Nissan Forums
Hmm, for pedal switches, I'd go dealership or pick-n-pull and get it over with You could go for new parts online, but run the risk of a mismatch Rock Auto is cool and I think they'll use your VIN to confirm a match, but I don't recall Maybe car parts stores like O'Reilly's and Autozone have those
- VQ30DE - Timing Cover Removal Tips - Nissan Forums
If this wasn't a NICE black on gray 5-speed with good body, paint, interior, sound system, and new suspension, its new home would have been Pick-and-Pull back in November Does anyone have an opinion on how the old engine internals looks from the pictures so far?
- 96 HardBody wont stay running. . . HELP PLEASE!!! - Nissan Forums
But pull it all apart again and at this point the valve head too and check it all out A head rebuild is well worth the money NAPA did a great job on mine and the price was right Just pull the head off and take it in somewhere You'll need a new gasket set and all that good stuff too
|
|
|