|
- GMRS Interference - RadioReference. com Forums
Chasing down interference can be a hassle at times How are you powering your DB20-G? I know they come with a cigarette lighter adaptor but those can pickup interference from the vehicle pretty easily The best is to run the power lead from the radio directly to the battery and the ground lead directly to a chassis ground I usually use ferrite beads on the power leads to the radio and also on
- Solved: RF Interference from Dimmer Switches - QRZ Forums
Quin and Tom explain how to get rid of RF interference from dimmer switches used to control LED lights A real story that involves neighbors, the power
- Cleaning up noisy signals, band stop filter, and interference
I'm looking to "clean up" some noise both in general as well as in some signals I'm sure I have interference I'm just not sure where to start with it My first concern is the FM radio band 88-108 I have 3 stations broadcasting from about 4 miles away at 250 watts (94 1, 98 5, 103 1) they sit about 300 feet above me so pretty good line of sight
- GMRS 462. 600 East Brunswick Interference - RadioReference. com Forums
We are hearing a very strong repeater here in East Brunswick that we never heard before and its interfering with our system that is on 462 600 Seem to be doing alot of testing Unit numbers are used rather than callsigns (502 535 5xx, etc) No regard to other users on the frequency They just
- LED lighting RF interference? - RadioReference. com Forums
I keep hearing people claiming that LED light bulbs are causing RF interference Does anyone know what frequencies they are affecting?
- Motorola Talkabout FRS Radio Interference Eliminator CTCSS DCS codes
Motorola has a feature called 'Interference Eliminator' (i e privacy code) that is configurable for each channel These are CTCSS and DCS codes that they have programmed into the firmware of the radio as 0 - 99
- Help with interference affecting my keyless entry FOB
Sorry I was hoping to use one new thread as the other one was localized at finding help In either case I found the signal from the FOB and what I think to be the issue Here are my questions 1) Is the signal I have the arrow pointing to the one causing my issue? 2) How do I go about finding this signal? 3) The signal next to the one with the arrow is the FOB unlock press
- Interference | RadioReference. com Forums
Could a SDR sitting 2 to 3 inches right beside a SDS 200 cause interference on certain frequencies the reason I'm asking is the P25 system that I monitor the CC is 853 8625 I get 5 signal bars and 859 9625, 859 2625, 854 9875 and 856 2375 also has 5 bars then 851 875, 852 1875, 852 450 and
|
|
|