|
- LVDS Display Interfacing with Custom IMX93 Board
Dear Experts, I am working on a custom board based on the i MX93 processor and attempting to bring up an LVDS display ( RVT50HQSNWC00 ) I have added
- Configure LVDS to MIPI DSI Display Bridge (LT9211C) on iMX8MP
Hi NXP Team, I’m currently working on integrating the Lontium LT9211C display bridge with the i MX8MP EVK My use case is to input LVDS from the SoC and output MIPI DSI via the LT9211C The panel side (MIPI) has been validated using the bridge’s internal pattern generator, so the output pipeline fro
- Enable IMX8MP LVDS panel in uboot - NXP Community
Solved: We're currently working on enabling an LVDS display in L5 15 52 for an IMX8MP board We followed a guide on the NXP community website (
- i. MX 8M Plus - Configuring LVDS channels to odd and even
Figure 2: Normal LVDS cables connection The first Image shows the display output with the patch applied, and connecting the LVDS cables straightforward to the display panel (as shown in picture 2), which produces the image to be corrupted, since the even and odd pixel streams are inverted
- Add i. MX8MP LVDS driver in uboot - NXP Community
Test environment i MX8MP EVK LVDS0 LVDS-HDMI bridge(it6263) Uboot2022, Uboot2023 Background Some customers need show logo using LVDS panel Current BSP doesn't support LVDS driver in Uboot This patch provides i MX8MPlus LVDS driver support in Uboot If you want to connect it to LVDS panel
- LVDS Display Support for Custom Board LDB Node of the Device Tree
I'll be using lvds display directly connected to the mpu, so I should be using lcdif2 which points to the ldb, am I correct? If so do I need to make any additional changes to the evk bsp other than DT updates to be able to use an LVDS display with my custom board Any changes required with the clocks or kernel menuconfig?
- i. MX U-boot Configuration for Display - NXP Community
LVDS: yes, since all the timings are inside the device tree node you can change them Here is an example for our latest 7"1280x800 display, although only the latest U-Boot binary lists it, you can have it running by entering: => setenv fb_lvds tm070jdhg30:24:68152388,1280,800,5,63,2,39,1,1 => saveenv Note that it goes like this:
- i. MX8MP Custom Board LVDS Display - NXP Community
Solved: Hello, We are trying to bring up our LVDS display with our custom board we've patched the device tree imx8mp-evk dts for the kernel as
|
|
|