|
- accufab vs LFP bigmouth throttle body - Lightning Rodder
Accufab is was a premium brand The lfp is likely built to less exact tolerances But I've seen the same complaints from both throttle bodies And neither is really necessary until your making power 2001 Ford Lightning - A few things done Built at home
- Fuel pump resistor | Lightning Rodder
I know there have been some previous threads on this but does anyone know where i could get my hand on a 2001 lightning fuel pump resistor(F81z-14A601-AC) I believe that’s my problem to why it shuts off as soon as it starts
- caged lower pulley - Lightning Rodder
Go to LFP, Lightning Force Performance, and buy a lower pulley adaptor Then you can buy whatever size lower pulley you want, including stock 7 5 The adaptor bolts onto the front of the crank with three bolts The pulley bolts onto the adaptor with six bolts Stock tune can handle a two pound over, or 8 inch lower pulley with no problems Been doing that since 2010 Then put that stock POS on
- IAC Hose pipe Replacement | Lightning Rodder
I'm currently restoring a 2004 Lightning Almost done When I bought it, the last owner had installed a K N Air filter with that PLastic adaptor instead of the flexible rubber That part has 3 holes at the bottom, 1 for the Idle Air Control Valve pipe, 1 for the engine PCV vent, and another for
- Gen 2 Lightnings | Lightning Rodder
Discussion of the "Second Generation" SVT Lightning (1999-04)
- long tube headers? - Lightning Rodder
would long tube headers and a mide pipe minus the cats really help an otherwise stock Lightning, that has a pulley, cold air intake and a tune?
- Coyote Swap | Lightning Rodder
Help Lightning fam honestly my block is done after going deeper into the truck I’m thinking of switching into a 5 0 coyote what is needed for the swap if any people could help me out, or how does the whole transmission, computer up to harness work on these trucks when swapping into a coyote
- Throttle body replacement? - Lightning Rodder
F3TZ-9E926-J is the original throttle body part, but no one has it Finding 70 and 75 mm as replacements for the original 65mm Truck is stock with no power adds, which replacement TB are you running, and what would be the part number Was told to avoid BBK, as their quality has declined Thanks in advance
|
|
|