|
- KPro Red Board with D1 flashing - Hondata
With everything plugged in and the ignition in the on position, go to the Help menu and click on "send information to Hondata support" Include a detailed description of the problem
- Hondata Kpro Online Ign Off, Green Light Red blinking. Cant Upload . . .
2 Grounds from the Tranny 1 Gound from the Valve Cover head Harness Ground onto the head (coolant out neck bolt) Rcrew Harness ground onto the tranny and coolant neck bolt on the head) Gauge etc, lights up No check Engine I want to load in a basemap for a tune but cant upload erase or anything, ECU is reconized with firmware, etc tho
- Kpro not connecting - Hondata
What is the serial number that is on the K-Pro board inside the ECU? From Help, About, what is the version of software you are using?
- KPRO RED FLASHING LIGHT - Hondata
Can you try removing the K-Pro board and trying it in your Friends ECU? This will tell us if it is the K-Pro or the ECU that might be the cause of the problem
- KPRO says ONLINE, DRIVERS ON, IGNITION OFF HELP
My Problem and FIX: I tried to power a Walbro 400lph fuel pump to the stock fuel pump power system and it went pop, the car wouldn't start, and Kpro wasn't reading ignition on I tested all kinds of wired in the car associated with the fuel pump power system and It all checked out I THOUGHT I checked all the fuses but I didn't
- Kpro issues | Honda Acura K20a K24a Engine Forum
Check the crank position sensor make sure your wiring is correct if it’s a k24 sensor as well as your tps wiring You got all the grounds? It's a stock K20z1 with an RBC intake manifold, z1 transmission
- KPro Red Board with D1 flashing - Page 2 - Hondata
You mean remove the KPro and install it in another ECU? No I have not tried that and was under the impression only Hondata did that type of work I;ve prepared dozens of S300's but never a KPro If there is a guide for removing and replacing I would dare to do the swap
- Kpro v4 D1 flashing red - Hondata
Nvm figured it out had to do with the conversion harness It now lets me upload base maps and data log
|
|
|