companydirectorylist.com  Global Business Directories and Company Directories
Search Business,Company,Industry :


Country Lists
USA Company Directories
Canada Business Lists
Australia Business Directories
France Company Lists
Italy Company Lists
Spain Company Directories
Switzerland Business Lists
Austria Company Directories
Belgium Business Directories
Hong Kong Company Lists
China Business Lists
Taiwan Company Lists
United Arab Emirates Company Directories


Industry Catalogs
USA Industry Directories














  • Spar vs. mast. Whats the difference? | SailNet Community
    The mast of a sailing vessel is a tall spar, or arrangement of spars, erected more or less vertically on the centre-line of a ship or boat Its purposes include carrying sail, spars, and derricks, and giving necessary height to a navigation light, look-out position, signal yard, control position, radio aerial or signal lamp
  • What is a Deck-stepped mast and keel-stepped mast
    The mast "step" is the location where the bottom of the mast is secured If this step is on the deck, the weight of the mast is usually supported by a "compression post" or weight bearing pole under the deck and transferring this force to the keel
  • repairing cracked mast with welding | SailNet Community
    The mast is a proctor, which is 47' and only 6"x4" and has a good deal of flex Even with running backs secured, there is flex to some degree through the entire mast, and especially above the running backs while sailing hard to weather The mast is ~ 1 8" thick, and the plate is a good 1 16 thicker than the mast walls
  • Folding Masts | SailNet Community
    Apparent, folding mast setups on larger, long, and heavy masts like yours and mine present some interesting issues to solve On my 27 Buccaneer I lower the mast via the trailer's high mounted winch lowering to the aft and onto a temp cradle at the stern It works just fine but then I have to un-pin the base and carry the mast forward for stowing
  • Mast Winch Install Rigging - SailNet Community
    Hi all, I'm in the process of planning to install two Lewmar 16STs on either side of the mast of my PS 34 I've added hardware to masts before, but never winches It's a pretty stout mast, but doesn't have any built-in pads reinforced locations for winch mounting I have a few questions about
  • Whats the easy way to raise a mast? | SailNet Community
    I've got an 18' 1961 Mercury by Numes (#419) wood with fiberglass hull Very tall (26') aluminum mast and with a fixed keel, the boat sits high on the trailer Mast needs to slip down through the shaft and into the base Tried to do this today with a friend and we simply couldn't get the
  • Mast height question - SailNet Community
    I am buying a boat and near my house there is a bridge height I am concerned about When looking I see "mast height" listed in the specs Is the mast height the max height measured from the waterline to the top of the mast (which seems right) or is it the height of the mast from where it is
  • corrosion at base of mast - SailNet Community
    Hi all, As you can see from the photo, there is some nasty corrosion at the base of my mast Based on some internet searches it looks like the recommended repair is to cut away the corroded area and raise the mast step Does anyone have any other recommendations? Also, can anyone tell me what




Business Directories,Company Directories
Business Directories,Company Directories copyright ©2005-2012 
disclaimer