|
- MultiTech Developer Resources
Multitech net focuses on collaborative software development for MultiTech products This is an open environment where you can ask development related questions and hear back from MultiTech engineering or a member of this community Select a product or software section for development information or use the forums to directly interact with the community
- MultiTech Developer Resources » Downloads
1 Create a support case with the relevant information at https: support multitech com including: a Select Other in the Service Requested drop-down b Select the closest MTCDT or MTCDTIP model to what you have in the Product drop-down (must be a model that ends in 247L or 267L) c In the Subject field, enter Request for Redpine Drivers d
- MultiTech Developer Resources » Flashing mLinux Firmware
NOTE: This section describes upgrading mLinux™ locally on your device and is intended for experts with the appropriate technical knowledge (Otherwise, use the alternative method Upgrading mLInux ) Refer to the Downloads page for applicable pre-built images The following procedure generally only applies to the MTCDT-xx-210L model but can be used to convert a MTCDT-xx-210A model to MTCDT-xx
- MultiTech Developer Resources » Getting Started with mLinux
1 Install and Connect Hardware For Conduit ® installation, refer to the appropriate model and guides through the Conduit product page For Conduit ® Access Point installation, refer to the appropriate model and guides through the Conduit AP product page For Conduit ® IP67 Base Station, refer to the installation guide available through the Conduit IP67 Base Station page 2 Access the
- MultiTech Developer Resources » mDot
The MultiTech mDot mbed platform page has links to the LoRa API (libmDot) For a sample program showing how to configure and use the LoRa API, go to mDot LoRa Connect Example To flash custom firmware into the mDot, see the relevant steps in Flashing mDot Firmware Guides mDot Quick Start (with MTUDK2-ST-MDOT Developer Board)
- MultiTech Developer Resources » FaxFinder
The FaxFinder ® fax server is a turnkey solution that connects to an analog port (s) of a PBX capable of DID to DTMF conversion The FaxFinder-IP provides faxing through an IP telephone system FaxFinder converts faxes to PDF or TIFF files so you can send faxes from any application that can print and receive faxes as e-mails, wherever you are The solution provides distributed faxing
- MultiTech Developer Resources » Creating a Custom Application
NOTE: Support for Node-RED Node js on Multitech AT91SAM9G25-based products was discontinued within mPower 5 3 For mPower 5 3 3 to 5 3 8, users can install Node-RED as a custom application mPower 6 0 or later no longer supports this custom app option For alternative code examples in Python, see Example Applications below
- Topic: Factory reset Conduit MTCDT - MultiTech
Hi, The process for factory default is the following: —- For Factory Default of Conduit (MTCDT), Conduit IP67 (MTCDTIP), Conduit AP (MTCAP), rCell (MTR), or OCG (MTCDP or MT100EOCG): 1 Power on device 2 Wait for ST or STATUS LED to start flashing with a heartbeat rhythm 3 Press in and hold in the RST or RESET button for over 30 seconds 4 Release the RST or RESET button 5 Wait for device
|
|
|