|
- Cummins NHC 250 vs 6CTA 8. 3 opinions - SteelSoldiers
CONS -- parts availability, starts better than the NHC-250 in cold weather but still needs a sniff of ether I've had both NHC-250-powered trucks (M929A1, M928A1, M932) and 6CTA 8 3-powered trucks (M936A2, M932A2 and now two M925A2s) While I love the 6CTA 8 3 motor, I would suggest that anyone who is interested stick with the NHC-250-powered
- NHC-250 Fuel Injector Removal Clean Re-install Parts List??
Hey, What are the recommended parts Tips Tricks when removing, cleaning, and re-installing the clogged fuel injectors on an NHC-250? Any guidance Tips from those who have done it would be greatly appreciated! Thanks!! :beer:
- CUMMINS NHC-250 Problems - SteelSoldiers
What are common problems for the CUMMINS NHC-250 engine? I am going to pick up a M818 XM818 soon, and it would greatly help me if I knew what problems I could face on the way home (450 miles one way) Thanks in advance!
- NHC 250 Commercial Applications - SteelSoldiers
The NHC 250 is a Small Cam Cummins engine of the 855 cubic inch displacement Most of the Small Cam parts should fit on the NHC 250 There should be a CPL number on the data tag on the timing cover on the front left of the engine along with a manufacture date
- Nhc-250 Torque specs - SteelSoldiers
I have M816 with the trusty 250 cummins I have a few bad injector o-rings since I am getting fuel into the oil I got the new o-rings but I need to know the torque specs for the injectors I have the manuals on CD and all I can find is torque specs for the heads then the rocker arm "towers "
- Water Pump Belt replacement - SteelSoldiers
I am in the process of replacing all the belts on my 5 Ton with a Cummins NHC 250 engine I got all of them off except 1 The belt from the crank to the waterpump has no adjustment and I can't figure out how this comes off on I looked at the manual but it appears mine is a bit different than
- Cummins NHC 250 vs Mack ENDT 673 - SteelSoldiers
I have a quick question Are these two engines anywhere near the same ballpark in regards to horsepower and torque output? I know what is in the manuals but can they be tweaked reliably to perform basically the same?
- Cummins NHC 250 High Idle Problem - SteelSoldiers
Hello, I would like to start out by saying thank you to everyone who keeps helping me with my vehicle problems This forum has been a great resource for getting my M817 closer to running I have been working on my M817 for a little while and figure out what was keeping it from running I can
|
|
|