|
- Okidata Users Manual for ML490 1 Resetting the Menu to the Factory Defaults
Note: Please print the current Menu Mode settings before you reset or change them This is the only way to have a record of the settings To reset the Menu to the standard settings (factory defaults): 1 Turn the printer off 2 Press SEL + LF while turning the printer on Press SEL + LF while turning the printer on
- Okidata C9600 Software Install Guide PCL printer driver
For further information please contact Oki Data at 1-800-OKIDATA or www okidata com Be sure to use the 15A AC power cord supplied with the printer Use of a power cord NOT supplied with this printer, or an extension cord, may result in overheating, and could be a safety hazard
- Oki Data Users Guide OL810 Replacing the Toner Cartridge
We recommend that you use only OKIDATA toner, because it is made specifically to provide the best performance from your printer Toners vary in composition Serious damage can result if you use a magnetic based toner in your printer
- Chapter 5 Using Your Printer - my. okidata. com
Oki Data has taken care to insure that the information is complete, accurate and up-to-date However, Oki Data assumes no responsibility for errors or omissions which may occur
- Okidata Users Guide OL410e-PS Installing the WordPerfect Printer . . .
The following instructions are for the Okidata OL410e PostScript driver To install the HPIII emulation drivers, simply substitute the text "Okidata OL410e Printer " wherever Okidata OL410e PostScript appears in the procedures below
- Okidata Users Manual for ML490 1 Setting Top of Form (TOF): Forms Tear . . .
Important! If you turn the platen knob when the printer is on, the Top of Form misaligns Always turn the printer off before turning the platen knob!
- okiDoc - ES8473 MC873 - Latest Firmware Update Information
This knowledge base document is intended to provide the latest information for firmware updates related to the MC873 and ES8473 models A link to the global firmware site is provided below, and any important information that will keep the MC873 and ES8473 models up to date
- Oki Data Users Guide Microline 320 321T-n Print Quality
Oki Data has taken care to insure that the information is complete, accurate and up-to-date However, Oki Data assumes no responsibility for errors or omissions which may occur
|
|
|