|
- Error P0102 Maf Sensor - How to test MAF to see if it is working?
Hey guys, I have a P0102 error, MAF sensor, low air input circuit something or other Air filter is not bad, I figure, maybe some contaminent on the MAF, which I will be cleaning later on, but I am curious, if I wanna run a test on the MAF to see if it is working right, how do I do it?
- 06 Jetta TDI P0102 MAF Issue - TDIClub Forums
I pulled the code with a scanner i own and its a P0102 MAF Low input I unplugged the maf to check if it made any difference in performance and its exactly the same
- 16486 - Mass Airflow Sensor - Signal too low - TDIClub Forums
Hi, had this code for a few months now VCDS says Mass Air Flow Sensor P01012 000 - Signal too low other than the engine management light the car runs absolutely fine I probed the MAF plug and here are the results for a 5 pin BOSCH plug Engine off Pin 01 - empty Pin 02 - 0 05v Pin 03 -
- P0102 fault code on Vag Com - TDIClub Forums
I have a 2002 Jetta TDI, and today I had the check engine light come on So I came back to the house and hooked up my Vag-Com to see what codes are showing P0102 is the only code showing So I opened up the air filter box and the filter looked real dirty, so I replaced it I also replaced
- 02 TDI P0102 code but maybe a symptom ideas - TDIClub Forums
I have an 02 Jetta TDI MK4 manual with 197000 miles on it Basically trouble free doing great No real change in fuel economy around 43 city with some higher speeds No oil consumption at all Last year I got code P0102 so i changed out the Mass Air Flow sensor and read it could also be a
- P0102 Error code, cant get rid of it! - TDIClub Forums
I took it to my mechanic and he pulled the code P0102 MAF Circuit Low Input so he said to change the MAF sensor and we did Once the new MAF (after market) was installed he cleared the code and it was fine until I turned the car completely off and restarted it, it would come right back!
- P1556 P0102 P0674 *Help* | TDIClub Forums
Ramps work fine, like cheap plastic rhino (?) First check things out, see if it's bad Your other code P0102 is another common one It's for the MAF, sometimes just the connect needs cleaned P0674 is glow plugs, deal with that latter Cold starts may be hard
- Replaced MAF, VCDS still shows bad - TDIClub Forums
I tested my MAF a few days ago with VCDS and it showed that it was bad Punched it in 4th gear at around 2000 rpm up to over 3000 rpm MAF requested was in the 800s but MAF actual was in the 500s It would sometimes go to 700 but quickly trail off I replaced the MAF with the new style
|
|
|