|
- ALL ABOUT PENDULUMS | NAWCC Forums
A basic pendulum consists of a weighted bob, and a stick, hanging from some suspension point The pendulum is the whole thing, because when we talk about "the mass (weight) of a pendulum", we're including the mass of the stick
- fast slow dial on mantel clock | NAWCC Forums
I am trying to get my Ingraham Adrian mantel clock that I got back from the clock repairman to keep accurate time I have been adjusting the nut on the pendulum bob I figure I will use the F S dial on the clock face to fine tune it Question: if the clock is slow do I turn the dial toward the
- Pendulum does not keep swinging - NAWCC Forums
Remember the clock movement powers the pendulum, the pendulum does not power the clock The fact that the clock runs with the pendulum off indicates that all the internal moving parts are free to move If the pendulum swings and there is no tic-toc sounds then the clock isn't running at all - the pendulum, for lack of a better word, is just
- Beat Setting 101 - NAWCC Forums
The pendulum passes back and forth across the beat-center in its progression from tick to tock and back The clock is in beat when the beat-center is perfectly vertical: tick and tock impulses are delivered at the exact bottom of the pendulum swing
- Clock Parts Terminology - NAWCC Forums
Pendulum returns again and another impulse provided to pendulum as tooth pushes against EXIT impulse (LIFT) face Drop precedes next entrance lock The terms used in this diagram are the same for a RECOIL escapement altho there are two differences in motion and design 1 After lock, pallet pushes wheel and entire train backwards - ergo recoil
- Takane Chime not Chiming - NAWCC Forums
I'm checking out this fairly old Takane chiming movement for a friend It runs, keeps good time, and the pendulum swings OK But no chime I tried googling instructions but they are very basic at best, more about setup, and all assume the clock is already chiming ok Also, this movement has
- HOW A PENDULUM CLOCK WORKS - NAWCC Forums
The pendulum hangs from a flat suspension spring, and swings freely But the rod or leader of the pendulum passes loosely through a loop in the end of the crutch
- Problems with pendulum suspension and rotation - NAWCC Forums
Hello I'm new to fixing clocks I have this clock, Reguladora, apparently it looks good, I lubricated it but without the pendulum it doesn't rotate, I have others and they rotate, I thought about weak spring energy It's making a strange noise and the pendulum suspension spring is twisted, I
|
|
|