- Rafter - Wikipedia
A rafter is one of a series of sloped structural members such as steel beams that extend from the ridge or hip to the wall plate, downslope perimeter or eave, and that are designed to support the roof shingles, roof deck, roof covering and its associated loads [2]
- Truss vs Rafter Pros and Cons Guide - roofer. com
Roof Truss vs Rafter, understanding what’s the difference between them is crucial when planning a roofing project Both serve as roof framing, but different in design
- Rafter Span Tables - myCarpentry
Visit the roof framing page for more information on cutting roof rafters, and visit the roof pitch calculator for determining rafter lengths based on rise and run
- Roof Framing: How to Measure, Cut, and Build Roof Rafters
The rafter tie resists the outward forces imposed on the load-bearing walls As the rafters sit on top of the wall plates at an angle, they exert horizontal forces on the exterior walls
- Roof Rafters in Civil Engineering: The Complete Guide
In structural engineering, a roof rafter is a sloped structural member that forms the roof framing system Rafters are typically made of wood, steel, or other materials arranged in a triangular framing pattern rising from the walls to meet at the ridge line of the roof
- Rafter Manual for Roof Framing
RAFTER DEFINITIONS Common Rafter: A rafter that runs perpendicular (90° when looking straight down on the roof) fram the top of the wall plate to the roof ridge forming the hypotenuse or diagonal of a right triangle
- Rafters: Functions, Types, Design, and Installation - Structville
Many common, or general purpose, rafters make up each roof The number of common rafter units needed for each project is mostly determined by the roof’s size and scope, as well as the distance each unit rafter must span Timber rafters rely on nails or screws for connection
- Rafter Roof Design [Step-By-Step Guide] - Structural Basics
Rafter roof with timber joists and wind bracing straps The rafter roof consists of 2 rafters which are inclined and connected to each other at the top with a ridge board
|