|
- Most common Raptor 660 problems explained (Read this. . .
This is just a start I aim to have one post in which the most common problems that 660 owners face will be described and resolved - to perhaps eliminate some of the constant repeats we get every day I’ll add to this as I have time and as readers contribute pertinent information I will
- Raptor 250 Discussion
Anything related to the Raptor 250 should go in here
- Valve Clearance - Raptor Forum
According to Factory Service Manual (downloaded here), the valve clearance (cold) is as follows; however, my feeler gauge only has a 006 mm to 027 mm
- Torque Specs - Raptor Forum
Can anyone help me with the following torque specks??: All motor mounts Swingarm nut and bolt Front and Rear Shock mounts Dont really wanna buy a Clymer just for this, so any help is most appreciated :thumbsup:
- Raptor 660R Year Model identification - Raptor Forum
Hello everyone, just joined the raptor club! Woohoo Ive read on this forum that the raptor was first introduced in 2001 Reading the VIN number on my frame the last four numbers are 2000 Does this indicate my raptor is a 2000 model? Also the model number sticker is missing from under the seat
- Raptor 250 vs. Honda TRX250EX - Raptor Forum
The Raptor 250 is a better machine for a rider who wants to step up to a YFZ one day, but the 250ex is a good little machine even know its a recon in sport just like the Z250 is a Ozark
- Fuel Injection Tuning - Raptor Forum
This section is only for EFI tuning discussion including all fuel maps and tuner settings
- setting timing on 80? | Raptor Forum
does anyone know the procedure for setting the timing on one of these little things i had to change the rings and im not sure how to line the crank and cam back up when it gets put back together is there an inspection hole somewhere in the case with a tdc mark on the crank and the cam?
|
|
|