|
- NanoPi R4SE - FriendlyELEC WiKi
The NanoPi R4SE(as "R4SE") is an open source platform with dual-Gbps Ethernet ports designed and developed by FriendlyElec for IoT applications The NanoPi R4SE uses the RK3399 SoC It has two Gbps Ethernet ports and 4G LPDDR4 RAM
- VLANs in Nanopi R4SE - Network and Wireless Configuration - OpenWrt Forum
Use the notation eth0 2 directly in the wan interface to apply tags of VLAN number 2 to the packets going to the modem To trunk eth1, just use eth1 X in different networks or bridges, with different values of X The switch must be configured with the same VLAN numbers on the receiving port
- FriendlyARM NanoPi R4S - OpenWrt
The NanoPi R4S is made by FriendlyElec for IoT applications It includes the RK3399 SoC, two 1Gbps Ethernet ports, microSD storage, and 4GB LPDDR4 RAM The NanoPi R4S Enterprise Edition adds an additional EEPROM for the MAC address These models are supported by official builds of OpenWrt
- anmansky np-r4s: firmware openwrt for nanopi r4s - GitHub
For detailed information about each firmware, please refer to the README md file of each model The currently supported router models are: Select Build OpenWrt for ${router} on the Action page Click the Run workflow button
- NanoPi R4SE emmc install - Installing and Using OpenWrt - OpenWrt Forum
While there where some people asking on the NanoPi R4S thread about installing Openwrt onto the emmc I believe it make sense to open a new thread to avoid confusion I have openwrt running fine from the SD Card I trie…
- NanoPi R4SE线刷OpenWrt至eMMC教程 - Kwrt(OpenWrt)软路由固件下载与在线定制编译
第二步: 获取R4Se固件 在此 https: openwrt ai ?target=rockchip%2Farmv8 id=friendlyarm_nanopi-r4se 下载或定制R4SE固件并解压为 img格式的固件 第三步: 进入刷机模式 1) 运行 RKDevTool (瑞芯微开发工具); 2) 断开NanoPi-R4SE上连接的USB和电源线, 弹出TF卡;
- OpenWrt Builds for NanoPi R2S NanoPi R4S - GitHub
Automated builds of OpenWrt for FriendlyARM NanoPi R2S R4S boards ⚠️ Since OpenWrt 23 05, those devices are supported by vanilla OpenWrt You might want to use regular builds instead of this one, especially if you plan to add extra kernel modules for usb wifi support
- NanoPi R4S - FriendlyELEC WiKi
FriendlyElec ported an OpenWrt system for it It works with Docker CE It is a good platform for developing IoT applications, NAS applications etc Each USB 3 0 port has 2A overcurrent protection RTC backup current is 27uA The R4S Enterprise version has a built-in EEPROM chip (Model: 24AA025E48T) which has a globally unique MAC address
|
|
|