|
- How can I use resisters to replace a Thermister?
If replacing the control board cures it, then obviously the control board is faulty What does the thermistor read between ST-SR, that's the rather crucial part you've left out - presumably (as the other two both read the same) they 'might' be connected together, so should read zero ohms (or very low) If it reads 30 62, then there's possibly two thermistors? But I don't see how replacing the
- Anyone repacked a Milwaukee battery pack? Need help
Ive just repacked a Milwaukee M18 battery pack for a mate of mine that had tired old cells, was still working just had very low capacity, so i swapped out the old cells for new identical spec samsung cells, welded them all back in and gave it back Tool worked OK but would not recharge, had a
- DJI Mavic, Air and Mini Drones - DJI Mavic, Air Mini Drone Community
Yaw motor looks ok, and roll motor centers, but the pitch motor snaps the gimbal too far back You can try replacing the gimbal assembly and see if that helps The next culprit could be your gimbal board inside the Mavic I sell the gimbal assembly (motors only, no covers) for $85 and the internal gimbal board for the same price
- Repair of Yaskawa Variable Frequency Drive | Electronics Forum . . .
The individual modules cost 400 a piece and replacing all 3 would still only run 1200 The problem is were not really satisfied with the repair shops we have been using To give an example why, this is the first drive I have tried to repair and after taking the drive apart I found the braking transistor emitter wire was not even connected
- Replacing damaged chips microcontrollers; Which components in consumer . . .
I'm just starting to get into electronics as a hobby and I was wondering if someone here could help me understand the process of replacing damaged microcontrollers With the right tools and practice, I could probably replace most components, even SMDs However, from what I understand, I cannot
- Definitive Technology Subwoofer repair | Electronics Forum (Circuits . . .
I have a Definitive Technology compact subwoofer that went belly-up and started buzzing constantly instead of producing any sound After research, I decide to try replacing the primary 6800uf 80v capacitors After replacing the caps, the behavior has changed, but not really for the better
- Replacing MOSFET, what to look for | Electronics Forum (Circuits . . .
Hello forum, I'm replacing the MOSFETs in an Electronic Speed Control (ESC) for RC cars My problem is, I don't really know what to look for when choosing the new MOSFET The current rating of my MOSFETs are all higher than the old ones in the ESC I'm more interested in the gate charge
- Replacing a ceiling fan pull switch | Electronics Forum (Circuits . . .
Hey all! I need to repair a ceiling fan It is a combined 5 bulb light fixture with a 3 speed fan There is one pull switch for the light and one for the fan The string coming out of the pull switch for the fan went off It went off inside the switch so the whole switch needs to be replaced
|
|
|