|
- Tuning the 660 CV Carburetor - Yamaha Rhino Forum
The Rhino uses a vacuum fuel pump, the engine must be spinning to pump fuel Since the carburetor is empty the engine will need to spin several times before the pump delivers enough fuel to the carburetor to start, do not use the throttle when starting
- 660 fuel pump? problems. . | Yamaha Rhino Forum
Rhino 660 would run for a couple minutes, then start dyeing and backfiring Tried cutting a 1 4" off the hose in the tank to ensure its not locking itself to the tank, replace fuel filter, cleaned the air cleaner, and still had the issue
- Fuel Pump - Cant prime it - Yamaha Rhino Forum
I searched through a lot of fuel pump threads but everyone was able to prime their pumps they just couldn't keep them primed I can't prime the one on my 06 The manual says to remove the vacuum hose from the intake and suck on it Fuel should be drawn up the line, through the fuel filter
- Great spark plug info - Yamaha Rhino Forum
I found this thread on a different site and didn't want to post a link to it so heres the first page about plugs Dan While servicing my stock '07 Rhino 450 I replaced the standard NGK DR8EA spark plug with NGK's Iridium plug DR8EIX on the advice of a friend I noticed an almost immediate
- 700 ISC valve - Yamaha Rhino Forum
Basically, my rhino was starting fine, then idling very high Here's what he said was going on: "When you turn on the key, the ISC valve should fully open (that lets air flow around the throttle blade for starting)
- The Best Belt for a Rhino!! - Yamaha Rhino Forum
I say "the", the Gates C12 carbon fiber belt must be "the" best belt for a Rhino After being on one of the RZR forums for a long time, it seems if not the only aftermarket belt recommended by forum members it surely is one of the very few belts recommended for RZR's Why do I mention, RZR's
- Differential Lock - Yamaha Rhino Forum
I have a 2009 Yamaha rhino sport 700 When I put it in 4 wheel diff lock I find that some of my wheels don't spin Help
- 06 660 starting problem - Yamaha Rhino Forum
Had a similar problem yesterday on my 07 Rhino Just wouldn't start after running it all day Started right up this morning but later had problems Looked under the hood where the brake pedal pushes through and noticed a plastic tensioner connected to a wire
|
|
|