|
- 2004 600ho 600ho sdi differences - Hardcore Sledder
I would like to know the difference between the 600 ho and the 600ho sdi motors Any comments would greatly be appreciated :smiley-faces7:
- 600 sdi no start | Hardcore Sledder
Legend 600sdi relay makes a buzzing sound when start button pushed in released start button relay still buzzing HAD TO PULL RELAY OUT TO STOP THE BUZZING SOUND KILLED A DAY OF PERFECT RIDING!!! THANKS SKIDOO!! all fuses good no starter turn at all Swapped relays still made a
- 2005 600 SDI running poorly | Hardcore Sledder
2005 600 SDI running poorly 1 reading Jump to Latest 13K views 5 replies 5 participants last post by Alive2Ride13 Feb 19, 2025
- 04-05 Doo 600 H. O SDI??? | Hardcore Sledder
The sdi is the 600ho motor with fuel injection So if you have ridden the 600ho then you wont notice much difference except the sdi will run alot better in all temps etc, and much much better mpg and smoother I've owned many 600ho carbed, and many sdi's including an 08 sdi's and you should definitely pick the sdi over the carbed version
- 2006 600 SDI Problem | Hardcore Sledder
Last year on doo-talk guys were talking about the 2006 600 SDI's going into limp mode or boging down while holding a sustained rpm range of about 7800 rpm I experienced this last trip out and but can't get on doo-talk from work to find out what guys did Has anyone found a fix for this problem?
- 600 H. O. VS 600 H. O. sdi | Hardcore Sledder
IMO SDI would be well worth having for two reasons--lower operating cost due to beter gas mileage, and greater range due to better gas mileage At 8 mpg my sled sucks down the gas and has a range of only about 80-90 miles
- Easy way to Isoflex bearings. . | Hardcore Sledder
While changing out my crank and pistons I noticed there are channels built in to the case to inject Isoflex during maintenance The Mag side can be done by removing recoil , flywheel and Stator bolt in the 4 o'clock position to inject into cavity bearing The Pto side can be done by pulling
- Electrical issue - no headlights, tach, etc | Hardcore Sledder
05 MXZ800, no lights, tach etc Relay is good and two 20 amp fuses are good There is no voltage at the harness with the relay at all Any ideas
|
|
|