|
- Home - SAAMI
SAAMI was founded in 1926 at the request of the federal government and tasked with creating and publishing industry standards for safety, interchangeability, reliability and quality, coordinating technical data and promoting safe and responsible firearms use
- New Revised Cartridge Chamber Drawings - SAAMI
Cartridge and Chamber Designs Standardized by SAAMI Note: Current Cartridge Chamber Drawing doc uments are contained within the SAAMI Standards They can be found HERE Information on how a cartridge becomes a SAAMI Standard can be found in our Informational Publications Newly Accepted Cartridge and Chamber Designs Links to technical data and drawings for the newly SAAMI accepted Cartridge
- SAAMI Standards - SAAMI
NOTE: Dimensional information for cartridges and firearm chambers, along with performance characteristics, is contained within the American National Standards published by SAAMI, listed below As these standards are only periodically updated, drawings for cartridges and chambers introduced and standardized by SAAMI or revised since the publication of the most recent standard can be found HERE
- Technical Information - SAAMI
The primary work of SAAMI is done by its Technical Committee in the establishment of industry standards Product standards for firearms and ammunition are developed by two Product Standards Task Forces, one for ammunition and one for firearms Recommendations of the task forces are submitted for review by the entire Technical Committee Technical Resources: American National Standards
- Public Introduction - 25 Creemoor
25 Creedmoor (25 CM) Maximum Average Pressure (MAP)* = 62,000 psi
- Faqs - SAAMI
What is the relationship of a “Go,” “No-Go,” and “Field” Headspace Gauges relative to the SAAMI Minimum and Maximum Headspace specification?
- Public Introduction - 7mm Backcountry
WARNING: Maximum Average Pressure levels greater than 65,000 psi may present increased risk of unsafe cartridge case or firearm rupture and thus require cartridge case and or firearm designs that depart from traditional practices (materials, construction, and other design criteria)
- Publications Advisories - SAAMI
SAAMI publishes resources on various topics relating to the storage, use and transportation of firearms, ammunition and propellant Firearm Safety Rules – Ten Commandments of Safety, Published in the Interest of Making and Keeping Shooting a Safe Sport Informational Publications and Advisories – SAAMI publishes information pamphlets, guidance documents and advisories on various topics
|
|
|