|
- Comparison of Shelly Gen 1, Gen 2, and Gen 3 Devices
Shelly smart home devices have significantly evolved over four generations, with each bringing improvements in performance, connectivity, and features Here #39;s a brief overview of the key differences between Shelly Gen 1, Gen 2, Gen 3 and GEN 4 de
- Is Shelley Gas (CNG) also appropriate for detecting non-compressed . . .
Is the Shelley Gas CNG unit appropriate for use in detecting leaks in these lower-pressure installations? It depends on what gas liquid is used in your low pressure installation When it leaks, it leaks methane or propane gas There are two types of this device and you should select the proper one depending on the gas contained in the leak
- Shelley und Anker Solix Pro3 - wie geht das zusammen?
Wie kann ich über die Shelley App den Plug S dazu motivieren mit der Anker Speicherlösung Solix Pro 3 zusammenzuarbeiten? In der Anker App habe ich den Smart Plug schon hinzugefügt
- Shelly Home
Discover Shelly Smart Control App for seamless management of Shelly devices and enjoy enhanced control at control shelly cloud
- Controlling Broadlink RM (IR) from Shelly Cloud (Using RGBW as a . . .
Hi there, I want to share something I did that could be useful to someone At home I use IoT devices from two vendors every day - Shelly and Broadlink Shelley's are, of course, from the whole range 🙂 The Broadlink devices are just 3 IR blasters (they are stable with the voice assistants, but I
- How to Add Shelly Devices to a Zigbee Network
Adding Shelly devices to a Zigbee Network Modified on Thu, 31 Jul at 3:56 PM
- Stuck Provisioning in Z-Wave JS UI Home Assistant
I received my Shelley Wave Plug US this week, but I haven't been able to include it in my network I used the Smart Start QR Code which added the device details to "Provisioning", but after 10 minutes there was no change
- Getting started: not getting any power to device - Shelly1 - Shelly . . .
I purchased a 12V, 5A DC power supply specifically for the Shelley and reading the instructions and looking at wiring diagrams, I wired the red to the 12V+ and the black to the N
|
|
|