|
- Smarthome Forum - Insteon Hub Delete Schedule
Negative, Stu--to avoid scenes with signal issues causing timers to be missed, the Hub app now enforces a 'one scene or device can be scheduled for any one time' policy That's no problem for Insteon devices, since you can add all the sunset devices to one sunset scene, but it limits non-scene capable x10 devices
- Smarthome Forum - Low battery sensing on new INSTEON Motion Sensor
Other than by noticing that it's -not- reporting motion, how does one tell when the new INSTEON Motion Sensor's battery is wearing out? It does seems to have some sort of internal low-battery detection (I'm told this is in the spec for the Skylink model that it's based on), but why doesn't it send an insteon message? If it did, I'm sure I could program Powerhome to send me an email - wouldn't
- Smarthome Forum - Driveway lighting
Get the Wireless Driveway Probe to go with it (Item 7313T at SmartHome) to monitor your driveway for a car arriving At $200, this is a down right expensive item
- Smarthome Forum - Insteon In-Wall On Off Switches (#2876S)
I just installed four Insteon In-Wall On Off Switches (#2876S) for my outside security lights I programmed them up to use X10 I can control the lights as expected with one exception The ALL ON command does not turn these lights on yet the ALL OFF does turn them off I have other Insteon switches (dimmers) and they work great and do come on with the ALL ON command
- Smarthome Forum - Newbie - slightly confused. . . Smartlinc vs Hub
Now that the Hub has been available for a bit - can anyone call out the actual differences between SmartLinc and an Insteon hub ??
- Smarthome Forum - Insteon Fanlinc with Casablanca Inteli-Touch Fan
I have a Casablanca Inteli-Touch fan that I want to use with an Insteon Fanlinc
- Smarthome Forum - X-10 Problems With LED Bulbs
I have had X-10 equipment for many years now with no problems I have a couple of X-10 Pro HR12A remote controllers and garden-variety X-10 Pro PLW01 wall switch modules in every room I'm slowly changing-out all my incandescent bulbs for LEDs I first swapped-out the ones in my office for GE LED 10 watt (100 watt equivalent) dimmable bulbs (they're being used with "SocketRockets" for whatever
- Smarthome Forum - 2844 Motion sensor
The motion sensor default appears to turn on the 2477S switch for 30 seconds and then turn it off again It will do this both day and night How can I configure the motion detector to only trigger when it is dark out and to extend the time the light remains on I have a 2245-222 hub that could be used for programming, however, the system will be deployed at a location without internet service
|
|
|