|
- Smarthome Forum - Driveway lighting
Get the Wireless Driveway Probe to go with it (Item 7313T at SmartHome) to monitor your driveway for a car arriving At $200, this is a down right expensive item
- Smarthome Forum - Low battery sensing on new INSTEON Motion Sensor
Other than by noticing that it's -not- reporting motion, how does one tell when the new INSTEON Motion Sensor's battery is wearing out? It does seems to have some sort of internal low-battery detection (I'm told this is in the spec for the Skylink model that it's based on), but why doesn't it send an insteon message? If it did, I'm sure I could program Powerhome to send me an email - wouldn't
- Smarthome Forum - Insteon In-Wall On Off Switches (#2876S)
I just installed four Insteon In-Wall On Off Switches (#2876S) for my outside security lights I programmed them up to use X10 I can control the lights as expected with one exception The ALL ON command does not turn these lights on yet the ALL OFF does turn them off I have other Insteon switches (dimmers) and they work great and do come on with the ALL ON command
- Smarthome Forum - Newbie - slightly confused. . . Smartlinc vs Hub
Now that the Hub has been available for a bit - can anyone call out the actual differences between SmartLinc and an Insteon hub ??
- Smarthome Forum - X-10 Problems With LED Bulbs
I have had X-10 equipment for many years now with no problems I have a couple of X-10 Pro HR12A remote controllers and garden-variety X-10 Pro PLW01 wall switch modules in every room I'm slowly changing-out all my incandescent bulbs for LEDs I first swapped-out the ones in my office for GE LED 10 watt (100 watt equivalent) dimmable bulbs (they're being used with "SocketRockets" for whatever
- Smarthome Forum - I O Linc dead?
I have an Insteon Hub and HouseLinc Recently, my garage I O linc sensor stopped sending me e-mails when the door opened and closed I also could not control the device or see its status from any controller
- Smarthome Forum - Insteon Fanlinc with Casablanca Inteli-Touch Fan
I have a Casablanca Inteli-Touch fan that I want to use with an Insteon Fanlinc
- Smarthome Forum - Insteon Thermostat has no power
I just bought an Insteon Home Kit which includes a 2441TH Thermostat I pulled the Honeywell TH210D1009 off and wired up the Insteon (very straight forward) Problem is the new Thermo has no power, no lights, no temp -- nada -- I thought I had a bad thermostat so I had it replaced at the store I bought it from I just wired the new one up, same problem
|
|
|