|
- White dots splashed when printing UV Printer - signs101. com
Hi, I have a UV flatbed printer Erasmart UV A5 that has an epson L800 printhead, I had problems before and had to change the printhead and suction pump, now it seems that white dots come out when printing on clear acrylic, does anyone know what could be happening? Clarifications: - Use Acrorip
- How to attach banner over windows? - signs101. com
Suction cups will work and will hold over mullions too This one was a polyester fabric banner but we've done it with regular 13 oz vinyl scrim banners too We use ones that are 2 5" diameter OK - thanks! Good to see they actually work
- Zund G3 2xl-3200 Help - Signs101. com: Largest Forum for Signmaking . . .
I want to thank all the members that have upgraded your accounts I truly appreciate your support of the site monetarily Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes Click to Support Signs101
- Roland VS-540 Black Bad nozzle test - Signs101. com: Largest Forum for . . .
as of a couple of days ago, I started having this issue The black is going from printing nicely to approx 50% injection after about 20" of printing Powerful cleaning get the print test back to 98% on black, all other color stay at 100% with beautiful print test Print head - all dampers -
- color drop out on Roland VS-540 - Signs101. com: Largest Forum for . . .
A powerful clean will often draw enough ink into the hose to print for a while as it uses a lot more suction than printing does Also when you replaced the damper, did you fit a new o-ring to the hose as these can fail over time and let air in as well
- Summa F1612 Bed Vacuum - Signs101. com: Largest Forum for Signmaking . . .
Setting the size in Summa Axis Control: It concentrates the suction to the smaller piece's width along the right side (origin side) It does not work for length so that option is useless- I talked to the tech who set ours up He said its basically 1 wall that moves inside from the left (wider materials) to the right (thinner) Also, if you try to cut 11 5x23 5 out of 12x24 it doesn't have
- Hanging a banner from a car for a parade? - Signs101. com: Largest Forum . . .
I have a political client, that is requesting a banner print of his campaign art, to hang from a vehicle window during parades I originally suggested vehicle magnets, as this is my normal solution to temporary graphics The customer does not want magnets, they want a banner They are
- Surfacing MDF Spoil board issue - signs101. com
We started the surfacing in the center and cut outward My assumption is it had a surface tension issue that caused the whole board to buckle and it lost its suction from the vacuum table Needless to say it ruined the sheet of MDF Any one have thoughts on how to avoid this?
|
|
|