Hot Rods How to wire MOPAR (2) field alternator - The Jalopy Journal The blue wire in the electronic picture must switched and not to the battery or it will run the battery down This wiring can also be used on late model Chryslers that have the regulator in the ECM If the regulator part of the ECM goes out you can use the electronic regulator and not have to replace the ECM much cheaper
OSPHO opinions, anyone? | The H. A. M. B. - The Jalopy Journal I have used ospho but blue lightning seems a stronger phosphoric acid mix You should do more than just brushing it on I first get rid of as much rust as possible by surface grinding A wire wheel is usually not strong enough, but it can polish the rust
Technical - Hidden radios for hotrods. . . | The H. A. M. B. I soldered it to the blue wire that feeds the radios AM tuner to its amp I put a toggle switch in the back of the radio so I could use both I put a 1K resister on the Left channel and one on the Right channel, twisted them together and soldered them to the radios amp through the switch
Folks Of Interest SCAM ALERT?Blueprint engines - The Jalopy Journal The Blue Print ad with the ridiculous prices showed up again last night on Facebook They show the front of the BP building and are using lots of BP pictures for what they call a warehouse clearance Only the uninformed would fall for their prices